Electronics > Beginners
Making an analog bar graph voltmeter 1-10V using 10 LEDs
<< < (3/3)
StuartA:
The Velleman company make a kit for an audio VU meter using LED's and dicrete componenets, see http://www.velleman.co.uk/contents/en-uk/p41.html The manual for it shows the circuit diagram (which is probably copyright, so not shown here). That might form the basis for what you want. I have built that kit and it works well.

S
mikerj:

--- Quote from: blueskull on July 09, 2019, 04:31:06 am ---Nowadays the cheapest way would be to use a cheap MCU (with an IO-based dual slope ADC, no hardware ADC/DAC/COMP/PWM needed) to implement LM3914.

--- End quote ---

As much as I feel a little sad (or maybe just nostalgic) that small micros have replaced so many functions these days I have to agree, even micros with built in 8-10bit ADC are very cheap.  This also gives the options of features such as peak hold, custom scaling etc.
ledtester:
In the January 1980 issue of Popular Electronics Forrest Mims describes how he used a simple chain of LEDs to get a bar graph display of a voltage.

See pp 77-80 (starting on page 73 in the PDF) in:

https://www.americanradiohistory.com/Archive-Poptronics/80s/1980/Poptronics-1980-01.pdf

Update: The article mentions a "Gregory Kovacs, a student at Eric Hamber Secondary School in Vancouver, British Columbia" who built a oscilloscope based on the ideas in the article and it even had  a storage capability. A quick google search reveals the person is most likely this Professor Emeritus at Stanford:

https://engineering.stanford.edu/people/gregory-kovacs
shanezampire:
Is that the same thing as something like - https://www.vellemanusa.com/products/view/?country=us&lang=enu&id=350546

The leds light as more power is given























Navigation
Message Index
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod