Electronics > Beginners
Measure the equivalent resistance in a simulator
<< < (4/5) > >>
bonzer:
I tried it even with other capacitor values (lower) and it's the same.

Well I don't know a better way to measure the voltage there. I measured it even separately without doing the difference letter by my own and it gives me the same values.
iMo:
Show me your Vs2 voltage (after the ac analysis finished) - see above my last post schematics..
bonzer:
Vs2 as you see is at 32V so Vs is close to 0V
iMo:
And the Vs voltage?
Mind the Vx are complex numbers, they could be shown as Re+iIm, or Magnitude_Phase. My results are Magnitude with Phase.
bonzer:
this is the Vs and these are the magnitudes. I've just tried ABS(*) and it gives me the same result so it's not the sum.
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod