| Electronics > Beginners |
| MOSFETS as voltage controlled gates |
| << < (3/4) > >> |
| SolderOcelot:
Very grateful for everyone's input :) I've decided to with an IC after all. --- Quote from: Hero999 on November 18, 2018, 10:47:34 am ---That's the way to go for 99% of designs nowadays. The great thing about the LM3914 is it has current regulated outputs, so the brightness remains constant, irrespective of any changes to the supply voltage. --- End quote --- I actually really like this feature. --- Quote from: Hero999 on November 18, 2018, 10:47:34 am ---An alternative would be to use an IC such as the the TL431, which has a sharp turn on threshold of 2.495V, as a voltage monitor. --- End quote --- Is the LM3914's turn-on treshold less sharp? Also, does the LM3914 know when I've attached 5 LED's instead of 10 and use that as a scale? |
| mvs:
--- Quote from: Faloude on November 18, 2018, 11:57:16 am ---Also, does the LM3914 know when I've attached 5 LED's instead of 10 and use that as a scale? --- End quote --- No, it does not. LM3914 is dumb as bread. You need to define voltage window, LM3914 will make 10 equal intermediate steps. Then you can decide which outputs to use. If RHI=1.5V, RLO=0.5V and only 5 last leds are connected, you will get 1.5V, 1.4V, 1.3V, 1.2V and 1.1V thresholds. |
| SolderOcelot:
--- Quote from: mvs on November 18, 2018, 02:51:53 pm ---No, it does not. LM3914 is dumb as bread. You need to define voltage window, LM3914 will make 10 equal intermediate steps. Then you can decide which outputs to use. If RHI=1.5V, LHI=0.5V and only 5 last leds are connected, you will get 1.5V, 1.4V, 1.3V, 1.2V and 1.1V thresholds. --- End quote --- Got it! How are those intervals (0.1V) set? I know, I should read the PDF. ^-^ |
| Audioguru:
You might be too late. The LM3914 is not made in an old DIP package anymore, they are only surface mount now. You might still find a few old ones somewhere. The LM3915 logarithmic display driver is not made in any package anymore. |
| MarkF:
--- Quote from: Faloude on November 18, 2018, 01:06:57 am --- --- Quote from: ArthurDent on November 18, 2018, 12:34:37 am ---Here is an IC that is designed for this type of application and I'm sure there are some others. https://www.ti.com/lit/ds/symlink/lm3914.pdf --- End quote --- On one hand I think it's pretty cool that IC's come onto my path now but on the other hand it's quite a buzzkill to just slap an iC on there and be done with the project. I was hoping to build this a bit more primitively. --- End quote --- If you would like to make it more complex, you could add a microcontroller to read the voltage and define any voltage steps you like. A pic18f1320 and constant current blocks made of LM358 op-amps and IRFP250 MOSFETs. Here is my idea with minimal components: Edit- If you add some MCP4802 DACs controlled by the PIC, you could have dynamic brightness for the LEDs. You would need to go to a different PIC (like a pic16f886). |
| Navigation |
| Message Index |
| Next page |
| Previous page |