EEVblog Electronics Community Forum

Electronics => Beginners => Topic started by: alanambrose on July 06, 2021, 09:59:19 pm

Title: Mounting 1/32 brick DC DC
Post by: alanambrose on July 06, 2021, 09:59:19 pm

As the title says - how do people generally mount these things? It looks like the pins are on a 0.15 inch grid?

TIA, Alan

Title: Re: Mounting 1/32 brick DC DC
Post by: esepecesito on July 08, 2021, 02:35:04 pm

Just soldering into PCB... At best measure the pins with caliper, or look in the datasheet.