Electronics > Beginners
Multiple LL N-Channel MOSFET's in Series
<< < (8/9) > >>
Ice-Tea:
LTSpice
TheDood:
Thanks @Ice-Tea I'll check it out

Can you or someone help me find the ESR for the 2.2μF capacitor on this data sheet?
mzzj:

--- Quote from: TheDood on August 26, 2019, 05:44:08 am ---Thanks @Ice-Tea I'll check it out

Can you or someone help me find the ESR for the 2.2μF capacitor on this data sheet?


--- End quote ---
15-20 milliohms guessed from impedance graphs.
TheDood:

--- Quote from: mzzj on August 26, 2019, 03:41:03 pm ---
--- Quote from: TheDood on August 26, 2019, 05:44:08 am ---Thanks @Ice-Tea I'll check it out

Can you or someone help me find the ESR for the 2.2μF capacitor on this data sheet?


--- End quote ---
15-20 milliohms guessed from impedance graphs.

--- End quote ---
Thanks, could you help me understand how you are calculating/guesstimating?

I've been finding the Xc per Hz but when I plug into a 305V cct I get pretty much the exact figures that are plotted on the Irms charts.

I was trying to note the perceived minor differences in the calculated ideal current and the plotted current, then solving for R in each scenario, and chalking up any differences in R to ESR, but I'm nowhere near precise enough. It seems I'm getting whole R values not 10s of mΩ values and not really sure this is what you were meaning?

Example:
2.2μF, @ 800Hz

Xc = 1 / ( 2×3.14×800×0.0000022)
Xc = 90.42Ω

I = 305 / Xc
I = 3.37A

Chart looks maybe closer to only 3.3A???

(305V / 3.3A) - (305V / 3.37A)
=

mzzj:

--- Quote from: TheDood on August 26, 2019, 07:22:06 pm ---
--- Quote from: mzzj on August 26, 2019, 03:41:03 pm ---
--- Quote from: TheDood on August 26, 2019, 05:44:08 am ---Thanks @Ice-Tea I'll check it out

Can you or someone help me find the ESR for the 2.2μF capacitor on this data sheet?


--- End quote ---
15-20 milliohms guessed from impedance graphs.

--- End quote ---
Thanks, could you help me understand how you are calculating/guesstimating?


--- End quote ---
Lowest dip in the impedance graph is indication of the ESR, ignore frequency and ignore the Irms charts. (page 12 Impedance Z versus frequency f)
Not by any means 100% accurate method but better than nothing. 
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod