Electronics > Beginners
need help identifying smd component!
Giorg:
Hi everyone .. i'm new on the forum and i'm full of questions :D
I need your help to identify this little white smd component. It's directly connected to the usb data + and - line. The circuit is a usb wireless adaptor.
The component has been damaged and the usb connector was brutally bended.
I tought about an optocoupler but I can't find anything really similar.
Is there a "quick and dirty" way to replace the component with something else?
I know that it's easier to buy a new one but i'm doing it only for the pleasure of fixing stuff :D i hate to throw away.
Thanks to all of you!
joelby:
It might be a USB port terminator and/or EMI/RFI filter. ON Semi sell these (http://www.onsemi.com/PowerSolutions/parametrics.do?id=832&lctn=home), though I couldn't see one that matched yours.
It's probably okay to bypass it completely for testing purposes.
Mechatrommer:
--- Quote from: joelby on January 31, 2011, 12:50:26 am ---It's probably okay to bypass it completely for testing purposes.
--- End quote ---
agree, maybe 2 EMI beads/ferrite combined together. a working bead just a short at both end, so continuity testing among pins might give some clue.
Zad:
It could be ferrites (and I'm pretty sure it is a common mode choke) but it could also be an ESD protection diode cluster. Something similar to this.
http://www.farnell.com/datasheets/48344.pdf
This one has 6 pins, but some only needs 4+gnd.
Mechatrommer:
doing some digging treat on the rt2571wf chip. here's another picture from somewhere, it seems its just like two normal resistors, not sure the label, maybe 000. i bet thats the cheap replacement for the ferrites. or maybe its indeed 2 resistors joined together for smaller footprint i think, but if its 000's, then whats the point? ???
from a forum http://www.hak5.org/forums/index.php?showtopic=16971
and here is the best i got for the datasheet/intro of the chip
http://www.datasheetarchive.com/rt2571*-datasheet.html
Navigation
[0] Message Index
[#] Next page
Go to full version