Author Topic: Tuning servo motors with a scope. Never used a scope before  (Read 1303 times)

0 Members and 1 Guest are viewing this topic.

Offline golash

  • Contributor
  • Posts: 31
Tuning servo motors with a scope. Never used a scope before
« on: February 19, 2015, 03:09:58 am »
Hi
I have a project for my new oscilloscope and I`m a bit uncertain how to proceed. I have a 3 axis
cnc machine that I've built and I`d like to tune the servos. I am totally new to the use of oscilloscopes
and I`m very nervous about potentially shorting out the new scope.
Here is a link to what I`d like to accomplish. Hoping for some guidance. This link has very detailed info
that I`m using for my testing. http://www.cnccookbook.com/CCServoTuning.htm
I guess my real question is how easy is it to kill a scope.
If anyone is interested I have a on-going thread at this location that details what I`m attempting to test.
http://www.cnczone.com/forums/general-cnc-machine-related-electronics/243416-new-control-panel-build-looking-advice-layout-3.html
 

Offline Mr.B

  • Supporter
  • ****
  • Posts: 1032
  • Country: nz
Re: Tuning servo motors with a scope. Never used a scope before
« Reply #1 on: February 19, 2015, 03:13:08 am »
Time is the overseer of all things.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf