| Electronics > Beginners |
| O-scope probe to BNC adaptor (Dave uses one in #642) - where to find/buy? |
| (1/4) > >> |
| ac8vk:
In my quest to learn more electronics, I recently purchased a used Rigol DG1022 -- and promptly started watching Dave's (and w2aew's) videos on signal generators, probes, etc... (Trying to avoid dreaded "new player" problems.) I have a question about the Oscilloscope probe to BNC adaptor Dave uses uses in EEVblog #652 around 5:48 into the video: https://youtu.be/PPgxFd97taY?t=349 Where do you get these? Wow that looks handy. Yes, I figured out that I could make the measurement properly using the spring adapter that cam with my Rigol PVP2150 probes - but that ties up one hand holding the probe... I have looked on ebay, amazon, Rigol and a few test supply sites - but it seems that many of the connectors are really mislabeled MCX to BNC adapters. Can anyone help me out with a clue or two for acquiring a pair of these? These seem like they would be quite handy - is there some reason they are not very common? Thanks in advance, Erik / AC8VK |
| Dave:
Keysight probes come with those included in the baggie. Very useful indeed. Can't help you with an alternative source, though. :-// |
| Doctorandus_P:
With some of my Oscilloscope probes I don't even need those adapters. I can just pull the front (with the pointy part and the 1:10 switch) of the probe and the remaining part is a BNC connnector (without the shroud). |
| magic:
Also (some? all?) Testec probes come with them. I'm afraid no universal solution exists because probes from different vendors have different tip shapes. |
| Tom45:
Two that I've bought: Cal Test Electronics CT3655 for 3.5 mm probe Cal Test Electronics CT2708 for 5 mm probe Why did I buy both? Because I wasn't paying attention and bought a bag of the 3.5 mm first. After they arrived I realized I needed the 5 mm version. As magic said, you have to be careful to get a size that matches your probes. |
| Navigation |
| Message Index |
| Next page |