I'm looking for a replacement for this battery out of a thermal monocular and striking out everywhere except on site batteriesnow and that site to me seems iffy at best. Part number is 1643-ct-1p1s18650-o.
I'm no electronics expert but to me it looks like a standard 18650 battery with a bms or protection chip and a 2 wire thermistor to sense battery temp. Closest thing i could find from a reputable dealer is
https://www.digikey.com/en/products/detail/globtek-inc/BL3500C1865001S1PCMK/16515760 SPEC SHEET
https://www.globtek.com/pdf/manual-datasheets/BL3500C1865001S1PCMK.pdf My thought is to buy the two wire globtech battery, unwrap it, swap thermistor from existing battery, put a new shrink sleeve over it, and repin the connector as it looks like it uses same pins as original battery. As I said I'm no expert so is there something I'm missing or does this sound like a reasonable and safe plan to get this back up and running? Or am I risking component damage or blowing up a battery with this idea?
If anyone has a reputable place to buy a battery that will fit right I would rather go that way but at this point to me it is looking like the globtech battery is my best option or possibly buying a spot welder and spot welding the existing circuitry to a new battery.
Also OEM mfg looks to be min order quantity of 500 and OEM monocular mfg will not sell parts.