Electronics > Beginners
One short pulse switch needed
(1/1)
charles713:
Hello Everyone, I have a 12V motion detection switch, a 12V power supply and 12V buzzer that I want to buzz shortly (0.5 to 1.0s) once the motion is detected. What should I look for and use as one short pulse switch?,relay? I have no idea about this stuff. I am familiar with basics only. Will appreciate your advice. Thanks!
GerryR:
You can buy a programmable Timing Relay, and set it up as a one-shot for the time required.  Schneider Electric / Magnecraft makes one, 822TD-10H/UNI from Newark or Allied Electronics will do what you want done.  You can probably download the spec sheet to see how it operates.
Zero999:
The classic is a monostable, typically a 555 timer.
https://www.electronics-tutorials.ws/waveforms/555_timer.html
charles713:
Thank you, a "timing relay" was what I was looking for. There are ready to connect inexpensive ones on eBay or Aliexpress, so I am good now.
Navigation
Message Index
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod