Electronics > Beginners
Operational Amplifier driving MOSFET
<< < (15/15)
Ian.M:
That should be fine for any normal power MOSFET.  Typically one sees problems if the gate track snakes around larger boards, or if the gate is directly driven by a low impedance and there is significant reactive impedance in both the drain and source circuits.

IMHO its time to just <expletive> build it!
8)

I'll probably be ignoring further posts in this thread unless you post a photo of the actual build. :popcorn:
mike_mike:
@Ian.M you can find the photos in the following link: https://imgur.com/a/9Bpcbhi

I am sorry about the quality of the photos. I do not have a camera. I used my smartphone.
I used the toner transfer method for the PCB. I put solder on all traces to prevent the oxidation.
Navigation
Message Index
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod