EEVblog Electronics Community Forum
Electronics => Beginners => Topic started by: chris1971 on October 04, 2022, 05:46:51 pm
-
Hi all hope someone can help I trying to repair this board it is for a hot water heater that operates on lpg the part iam trying to identify is the black plastic component it generates the spark that a ignition cable attached to board via a 2.8mm spade there is no spark coming from unit
-
That'll be the ignition transformer, potted to prevent arcing between winding layers.
These generally aren't "off the shelf", and perhaps the best source would be another heater board. The few I've seen all have these transformers, but have different footprints, so I'm unaware of any standards here.
-
Thank you I've spent hours looking for this part will look for a old board