Electronics > Beginners
Peak detector with load?
<< < (3/3)
mikerj:
I don't use this tool but the KiCad Forum has a detailed answer addressing the cause and solution to this.  Essentially the design rules check sees a bunch of power input pins tied together (i.e. Vdd/Vss on the ICs) but you need to tell it which node the power is being supplied from.
FriedMule:

--- Quote from: mikerj on August 28, 2019, 09:56:48 pm ---I don't use this tool but the KiCad Forum has a detailed answer addressing the cause and solution to this.  Essentially the design rules check sees a bunch of power input pins tied together (i.e. Vdd/Vss on the ICs) but you need to tell it which node the power is being supplied from.

--- End quote ---
Great thanks, I'll try to look again:-)
FriedMule:

--- Quote from: mikerj on August 28, 2019, 09:56:48 pm --- you need to tell it which node the power is being supplied from.

--- End quote ---
That hint was all I neaded to solve the errors, thanks a lot! :-)
mikerj:
Glad I could help, and thanks for posting the resolution.
Navigation
Message Index
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod