Electronics > Beginners
Peak detector with load?
mikerj:
I don't use this tool but the KiCad Forum has a detailed answer addressing the cause and solution to this. Essentially the design rules check sees a bunch of power input pins tied together (i.e. Vdd/Vss on the ICs) but you need to tell it which node the power is being supplied from.
FriedMule:
--- Quote from: mikerj on August 28, 2019, 09:56:48 pm ---I don't use this tool but the KiCad Forum has a detailed answer addressing the cause and solution to this. Essentially the design rules check sees a bunch of power input pins tied together (i.e. Vdd/Vss on the ICs) but you need to tell it which node the power is being supplied from.
--- End quote ---
Great thanks, I'll try to look again:-)
FriedMule:
--- Quote from: mikerj on August 28, 2019, 09:56:48 pm --- you need to tell it which node the power is being supplied from.
--- End quote ---
That hint was all I neaded to solve the errors, thanks a lot! :-)
mikerj:
Glad I could help, and thanks for posting the resolution.
Navigation
[0] Message Index
[*] Previous page
Go to full version