EEVblog Electronics Community Forum

Electronics => Beginners => Topic started by: JustMeHere on May 20, 2020, 05:52:54 pm

Title: Please Help Identify Connector
Post by: JustMeHere on May 20, 2020, 05:52:54 pm

Please help identify the type of connector and the pin type.  It belongs to a John Deere time delay control module.  I want to make a 3 inch extension cable so I can probe it easier.

Title: Re: Please Help Identify Connector
Post by: Jwillis on May 21, 2020, 02:43:16 am

Looks like 6.3mm automotive. Finding an exact match of that connector may be difficult but 6 way and 2 way are fairly easy to find . If you measure pin width and spacing centre to centre it might help in identification.