| Electronics > Beginners |
| Potentially a stupid question but... |
| << < (6/6) |
| amyk:
--- Quote from: Bratster on December 31, 2018, 09:59:51 am ---Ideally you would include some relays in this adapter so that it only connects the output when it gets both inputs. That also make sure that there is never any exposed voltage on the male pins. and if a circuit breaker trips it will protect any other loads on that circuit from possibly seeing voltage. --- End quote --- https://hackaday.io/project/4818-a-quick-220-clone |
| Bratster:
--- Quote from: amyk on January 12, 2019, 08:19:42 am --- --- Quote from: Bratster on December 31, 2018, 09:59:51 am ---Ideally you would include some relays in this adapter so that it only connects the output when it gets both inputs. That also make sure that there is never any exposed voltage on the male pins. and if a circuit breaker trips it will protect any other loads on that circuit from possibly seeing voltage. --- End quote --- https://hackaday.io/project/4818-a-quick-220-clone --- End quote --- Yep, that looks nice Sent from my Fi Moto x4 using Tapatalk |
| Navigation |
| Message Index |
| Previous page |