Electronics > Beginners
Power pins on connector
Nusa:
A series resistor will have no effect on the division of current in a subsequent parallel resistor situation.
Here's a calculator for your problem. Enter what you consider real-world numbers and see what you get:
https://www.digikey.com/en/resources/conversion-calculators/conversion-calculator-circuit-current-divider
It's already been suggested that 3 1A pins should be sufficient for a 1.5A current. If you're uncomfortable with that for whatever reason, use more pins. 4, 5, 10. Whatever you want. Or use a higher-current connector.
Navigation
[0] Message Index
[*] Previous page
Go to full version