Author Topic: logic ics for above 100 MHz operation  (Read 839 times)

0 Members and 1 Guest are viewing this topic.

Offline txx4488Topic starter

  • Contributor
  • Posts: 10
  • Country: in
logic ics for above 100 MHz operation
« on: December 21, 2018, 02:21:38 pm »
which are logic ics for or above 100  MHz operation ?
 

Offline mvs

  • Frequent Contributor
  • **
  • Posts: 370
  • Country: de
Re: logic ics for above 100 MHz operation
« Reply #1 on: December 21, 2018, 03:06:38 pm »
which are logic ics for or above 100  MHz operation ?
Schottky-TTL logic (74AS, 74ALS, etc), emitter coupled logic (ECL, PECL, LVPECL, etc), some programmable logic (CPLD, FPGA) and application specific ICs may have propagation delay under 10ns...
« Last Edit: December 21, 2018, 03:18:58 pm by mvs »
 

Offline Benta

  • Super Contributor
  • ***
  • Posts: 5871
  • Country: de
Re: logic ics for above 100 MHz operation
« Reply #2 on: December 21, 2018, 04:03:14 pm »
74ACxx powered at 5 V will run to 125 MHz (flip-flop clock speed).
 

Online joeqsmith

  • Super Contributor
  • ***
  • Posts: 11739
  • Country: us
Re: logic ics for above 100 MHz operation
« Reply #3 on: December 21, 2018, 09:49:16 pm »
I picked up one of those cheap Arty boards a while back and was able to clock it at 700MHz.   

https://www.eevblog.com/forum/microcontrollers/typical-speed-of-fpgas/msg1282290/#msg1282290

Offline RoGeorge

  • Super Contributor
  • ***
  • Posts: 6202
  • Country: ro
Re: logic ics for above 100 MHz operation
« Reply #4 on: December 21, 2018, 09:59:02 pm »
Unless it's a very simple logic, logic IC's like the 7400 series are rarely used nowadays.

Instead of discreet 7400 type logic, nowadays FPGAs/CPLDs are used. and most of them (FPGAs/CPLDs) can do 100MHz or more.  Even more, there is a myriad of microcontrollers that can do logic operations in the 100s of MHz range.

What logic do you want to implement?  How complex it is?  What project do you had in mind while you were asking the question?
« Last Edit: December 21, 2018, 10:05:36 pm by RoGeorge »
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf