Author Topic: Problem: Atten ADS1202CL+ update firmware with Siglent!  (Read 1334 times)

0 Members and 1 Guest are viewing this topic.

Offline spano

  • Newbie
  • Posts: 4
  • Country: us
Problem: Atten ADS1202CL+ update firmware with Siglent!
« on: April 03, 2016, 09:35:45 am »
Hi all,
I update Atten ADS1202CL+ oscilloscope with Siglent SDS1000CNL. Now functions work good. But the Time/Div Not ?Valid.
oscilloscope tested with 1Khz:


Frequency is 1Khz But when calculate with Time/Div Frequency = 40Hz.

 can back to Atten firmware?
if No how it fix?
Many thanks in advance for any answers.
(excuse me My English is poor!)
« Last Edit: April 03, 2016, 09:38:07 am by spano »
 

Offline alsetalokin4017

  • Super Contributor
  • ***
  • Posts: 1927
  • Country: us
Re: Problem: Atten ADS1202CL+ update firmware with Siglent!
« Reply #1 on: April 04, 2016, 04:48:31 am »
5 x (0.000500 sec) = 0.0025 sec
1/0.0025 sec = 400 Hz
The easiest person to fool is yourself. -- Richard Feynman
 

Offline spano

  • Newbie
  • Posts: 4
  • Country: us
Re: Problem: Atten ADS1202CL+ update firmware with Siglent!
« Reply #2 on: April 04, 2016, 06:45:01 am »
thanks
But my Frequency is 1Khz not 40 or 400 hz!!
« Last Edit: April 04, 2016, 06:47:05 am by spano »
 

Offline spano

  • Newbie
  • Posts: 4
  • Country: us
Re: Problem: Atten ADS1202CL+ update firmware with Siglent!
« Reply #3 on: May 11, 2016, 02:29:46 pm »
nobody can help me? |O
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf