Electronics > Beginners
Question about my circuit board
(1/1)
Hextejas:
Looking at the back of this board, is what I marked as "A" part of the ground plane and is the part where B-----------> points to, part of the same plane?
Thanks
rstofer:
It certainly looks like one plane. You can do a continuity check with a DMM.
I have no idea why there is a slot but it probably serves as some kind of fault limit scheme.
Brumby:
--- Quote from: rstofer on December 15, 2018, 07:10:32 pm ---I have no idea why there is a slot but it probably serves as some kind of fault limit scheme.
--- End quote ---
The slot will force all current flowing through that arm to pass through a single point. The symmetric top section will be the same. This can help with decoupling - and I'll bet the solder joints you can see near the neck of each is for a capacitor to do just that.
Navigation
[0] Message Index
Go to full version