For an Isolation transformer, I have disconnected the (edit) isolation side ground pin from the earth-ground.
Now that the ground pin on the isolation side isn't connected to anything, should I leave it floating or should I short it Isolation-side-Neutral?
Edit: The reason I ask this is because I have seen
other transformers a transformer that has all 3, isolation-side neutral, earth-ground, isolation-side ground pin, shorted together.
Edit: I'll try and be more clear.
| +-------------------------+
| | | +-----+
Wall |===>| Isolation Transformer | ----->| DUT |
| | | ^ +-----+
| +-------------------------+ |
+--+
|
Previously, Earth ground from the wall |
went to the DUT with the scondary winding |
output here: ------------------------------+
It is this connection that I severed.