Electronics > Beginners

Regulated 9 volt dc power supply from 115 volt AC

<< < (3/5) > >>

fixit7:
Do you have a circuit showing more of the specific parts?

I see the MC78xx chip and the power transformer.

MarkF:

--- Quote from: fixit7 on May 23, 2019, 03:04:10 pm ---Do you have a circuit showing more of the specific parts?

I see the MC78xx chip and the power transformer.

--- End quote ---

The circuit for the PCB is the one I posted earlier in reply #5.
The large capacitor has a 10mm lead spacing and the small one has a 2mm spacing.

Edit- Do you want actual part numbers?

Brumby:
A variation on the PCB to keep it neat and single sided.

I've also added notations for the components:



D1, D2, D3, D4, D5, D61N5395 (note polarity)C16800uF voltage to suit output of rectifier (note polarity)C210uF 16V or higher (note polarity)R1Current limit resistor - say 1K0LED1LED for power indicator - almost any simple LED  (note polarity)Heatsink as appropriate for output power draw and input/output voltage differential.


Edit: Polarity of power indicator LED corrected.

MarkF:
@Brumby- Your LED polarity is reversed.

And just to take things over the top.

   

fixit7:
Nice pic. That's quite a large heat sink.

What is "Mercedes" device?

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod