Electronics > Beginners
repairing washing machine board Samsung Q1235V
Daxxin:
Display pop up for some seconds then goes off maybe protection thing the critical component IC DIP8 TNY267P
across pin1 and 8 with unsoldered C38 i get 80ohm is that normal for this IC?
Arjunan M R:
Here is the block diagram of tny267P
Arjunan M R:
https://www.power.com/sites/default/files/product-docs/tny263_268.pdf
Arjunan M R:
Pin 1 and 8 should not be shorted.You have to replace the ic.
Arjunan M R:
here is the pin names
Navigation
[0] Message Index
[#] Next page
Go to full version