Author Topic: Resistor color code help...  (Read 2082 times)

0 Members and 1 Guest are viewing this topic.

Offline casp3rtech

  • Newbie
  • Posts: 3
  • Country: us
Resistor color code help...
« on: November 20, 2016, 11:37:18 pm »
I can't seem to find this thing no matter what.. Resistor fried on a TV power supply and I can't seem to make out the color code using the colors I see.. Maybe I am doing something wrong. From what I can see its red, black, gold, orange, black... All code generators are giving me an error and even if i do it manually, it makes no sense.
 

Offline Yansi

  • Super Contributor
  • ***
  • Posts: 3789
  • Country: 00
  • STM32, STM8, AVR, 8051
Re: Resistor color code help...
« Reply #1 on: November 20, 2016, 11:54:54 pm »
If the left most band is RED (really cannot tell for sure from a photo with incorrect white balance), then it is 0.2ohm resistor. Err.... was.
 

Online Andy Watson

  • Super Contributor
  • ***
  • Posts: 1821
Re: Resistor color code help...
« Reply #2 on: November 21, 2016, 12:00:29 am »
I think the left band is brown. The gold band is a 0.1 multiplier, so it's a 1.0 ohm.
 

Offline Yansi

  • Super Contributor
  • ***
  • Posts: 3789
  • Country: 00
  • STM32, STM8, AVR, 8051
Re: Resistor color code help...
« Reply #3 on: November 21, 2016, 12:06:51 am »
Yeah youre right. My mistake.

Guess that was a current shunt from a switchmode power supply. If this one is fried, the mosfet and/or the controller IC might be as well.
 

Offline Brumby

  • Supporter
  • ****
  • Posts: 11154
  • Country: au
Re: Resistor color code help...
« Reply #4 on: November 21, 2016, 12:19:05 am »
If you take the bit of gunk on the left end of the body as a reference, the white balance wasn't too far off.

Here's my effort at rebalancing...

 

Offline casp3rtech

  • Newbie
  • Posts: 3
  • Country: us
Re: Resistor color code help...
« Reply #5 on: November 21, 2016, 12:20:47 am »
I have added two more while changing light settings on camera. This part is from a TV power supply that was damaged from power surge. So far I have found 3 bad capacitors, one fuse and this resistor. The power supply is massive and I can't find it anywhere! The model is BN44-00744A
 

Offline casp3rtech

  • Newbie
  • Posts: 3
  • Country: us
Re: Resistor color code help...
« Reply #6 on: November 21, 2016, 12:27:20 am »
The bad components locations so far...
 

Offline Brumby

  • Supporter
  • ****
  • Posts: 11154
  • Country: au
Re: Resistor color code help...
« Reply #7 on: November 21, 2016, 12:32:57 am »
I have added two more while changing light settings on camera.

For the lighting conditions - and my assumption that the gunk is white (or at least neutral) - your first photo was closest to correct white balance.

As such, I see the first band as brown.  The extra photos support this.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf