Electronics > Beginners

Resistor or Capacitor Please Help!!

<< < (3/3)

Zero999:

--- Quote from: wraper on May 23, 2019, 11:14:40 pm ---
--- Quote from: Zero999 on May 23, 2019, 09:40:35 pm ---
--- Quote from: giovesjo on May 23, 2019, 08:12:37 pm ---So you will exclude that is a resistor?


--- End quote ---
Not entirely. It could be a 0.2Ohm resistor, but it's unlikely.

--- End quote ---
Only if you use ferrite beads as resistors  :).

--- End quote ---
It could be used as a resistor, but it won't be a very good one. Yes, you're right. It's a ferrite bead of course!

giovesjo:
thanks for your answer very clear.

giovesjo:
I think you nailed it...thanks man!!

Arjunan M R:

--- Quote from: Zero999 on May 23, 2019, 09:40:35 pm ---
--- Quote from: giovesjo on May 23, 2019, 08:12:37 pm ---So you will exclude that is a resistor?


--- End quote ---
Not entirely. It could be a 0.2Ohm resistor, but it's unlikely.

--- End quote ---
If it is a 200mΩ resistor it will be a current shunt(not sure(thats the only purpose for 200mΩ as i know)).I dont think current shunts will be made that small(lower power rating).I think it will be an inductor.

wraper:

--- Quote from: Arjunan M R on May 25, 2019, 03:09:14 pm ---
--- Quote from: Zero999 on May 23, 2019, 09:40:35 pm ---
--- Quote from: giovesjo on May 23, 2019, 08:12:37 pm ---So you will exclude that is a resistor?


--- End quote ---
Not entirely. It could be a 0.2Ohm resistor, but it's unlikely.

--- End quote ---
If it is a 200mΩ resistor it will be a current shunt(not sure(thats the only purpose for 200mΩ as i know)).I dont think current shunts will be made that small(lower power rating).I think it will be an inductor.

--- End quote ---
It's not a resistor/current shunt but there is no issue of small resistor being current shunt. For example 0.2 ohm 0402 resistor can pass up to 0.5A current.

Navigation

[0] Message Index

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod