EEVblog Electronics Community Forum
Electronics => Beginners => Topic started by: khtwo2002 on January 07, 2016, 07:30:14 pm
-
When I use my finger pick the plastic part of the probe, the ds1045z shows a 500mv 60hz wave. And if I use my finger to touch the metal part of the probe, the ds1045z shows a 10v 60hz wave. Is this normal? I'm in Canada.
-
Yes, it's normal to see some mangled looking 60Hz (from power distribution) sine wave at some level that varies with your location.
-
Thanks.