Electronics > Beginners
Rosin-free solder
<< < (5/5)
KL27x:

--- Quote ---They suck. Your hands will sweat very fast, not comfortable at all. I would suggest ESD gloves with rubberized fingers or rubberized inner area. TME sells cheap ESD gloves which are quite comfortable, even for prolonged use.

--- End quote ---

Finger cots are useful where you have to handle small items. For soldering, you probably need to take some care with the side of your hands, too, to avoid setting your hands down on splatter or excess liquid flux that gets on the bench.
starjump:
Thank you for all of the posts. I will report back on how I get on. In the meantime, I am going to try this solder:

https://www.rapidonline.com/warton-metals-omega-63-37-fast-flow-2-flux-solder-wire-22swg-0-711mm-500g-85-6154
https://www.ebay.co.uk/itm/22SWG-500g-ROSIN-FREE-SOLDER/263701622136?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m2749.l2649

I have ordered some today from eBay.

Navigation
Message Index
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod