Electronics > Beginners
RS Pro Tin 60/40 or Multicore 60/40
<< < (5/5)
malagas_on_fire:
I've picked up this MBO 60 Sn / 38 Pb, 2% Cu  0.5mm solder and performs pretty well and has a dataheet:

https://www.electronicaembajadores.com/en-GB/Productos/Detalle/HRJ1221/tool-instrument/soldering-consumables-and-accesories/mbo-soldering-tin-60-sn-38-pb-2-cu-0-5-mm-250-g
stj:
i had a reel of MBO, the flux was not as good as stannol IMO

malagas_on_fire:
Gotta try next time some stannol  :-+

Has anyone tried also donau solder 60 Sn  38 Pb Cu 2%? I was also OK
SteveyG:
In case anyone missed it, there was little difference between the major brands when I tested them. Having said that - if Multicore solder is an option, it would always be my default as it's excellent quality and always consistent.

Navigation
Message Index
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod