Electronics > Beginners

SMD cap ID help

(1/2) > >>

warrjon:
Hi Folks, My name is Warren I was a bench and metrology tech most of my life, retired now. I have done very little SMD work as most of the gear I worked on was Military and/or Aviation where we had to use OEM parts so my SMD experience is limited.

Anyway my TDS2024 scope decided to turn its toes up. I have identified 3 faulty components 1 cap and 2 transistors. I have IDed the transistors but the cap is eluding me. The ID id J685L  (I make out the 685 is 6.8uF) and polar so either Tantalum or Electro.


JustMeHere:
See if you can figure out what it is connected to.  Then see what the datasheet says that component needs.

radiolistener:
tantalum smd capacitors usually has yellow color.

Nerull:
Plenty of tantalums are black.

gamalot:
They are 6.8uF/6.3V tantalum capacitors.

Navigation

[0] Message Index

[#] Next page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod