| Electronics > Beginners |
| SPI Triggering Issue on SDS1104x-e Scope |
| << < (3/3) |
| Performa01:
--- Quote from: mrprecision on December 05, 2018, 07:29:14 pm ---I just created two Images from the Scope. With the following settings: CH1: CLK CH2: Trigger signal (if SPI triggering is not used) CH3: SPI Data CH4: ~CS --- End quote --- Could you please provide the CSV data for the traces in the 2nd screenshot? Just make it a ZIP-file and attach it to your next posting. Siglent R&D will then be able to analyze your data and hopefully find the cause for the trigger malfunction. |
| mrprecision:
I have saved both cases as png an bin file for you. |
| Performa01:
--- Quote from: mrprecision on December 06, 2018, 07:34:55 pm ---I have saved both cases as png an bin file for you. --- End quote --- Siglent R&D has analyzed your data and confirmed this is a bug. It will be solved with the next firmware release. |
| Performa01:
Please update your scope to the latest 6.1.33 firmware. This should solve the issue. https://www.siglenteu.com/service-and-support/firmware-software/digital-oscilloscopes/#sds1000x-e-series |
| Navigation |
| Message Index |
| Previous page |