EEVblog Electronics Community Forum
Electronics => Beginners => Topic started by: Vindhyachal.takniki on July 04, 2015, 05:28:31 am
-
1. I have RPi2 board with raspbian loaded.
But if I run sudo apt-get update command, it just don't work.
First some packagnes failed & then loading get stuck at 6%.
2. However, if I try to install other packages on internet they work fine.
-
Hello,
Not to sound rude, you do realise that this is an electronics forum and not a *nix forum.
ubuntuforums and debian forums are the ones where you should be looking.
PS: Granted, people here will help you out eventually but not spoonfeed. Please do your research first and approach if you still cannot find a solution.
Three back-to-back posts wont guarantee faster response.
From the looks of it, you are not having much experience with *nix either. First use the desktop version to get acquainted then
approach the embedded ones like pi and BBB.
-
try to ping to an internet site.
If network is ok, try to use another debian mirror. /etc/apt/sources.list is the key for it
-
You will find interesting files in /var/log
-
Hello,
Not to sound rude, you do realise that this is an electronics forum and not a *nix forum.
ubuntuforums and debian forums are the ones where you should be looking.
Or even better, at Rpi 'home': https://www.raspberrypi.org/forums/ (https://www.raspberrypi.org/forums/)
Then, you also need to explain better the 'failure' in apt-get. Doesn't find the package, is the index outdated (aka run apt-get update first), can't save the package (filesystem full) ?