Author Topic: Suggestions for application of High voltage cap.  (Read 543 times)

0 Members and 1 Guest are viewing this topic.

Offline Radeongas

  • Newbie
  • Posts: 2
  • Country: no
Suggestions for application of High voltage cap.
« on: February 16, 2018, 09:41:32 pm »
Any suggestions for an application for these caps? Got two of them but unsure what I can use them for. Bonus points if it's something with RF.

Edit: Wrong section, trying to move it. sorry  ;D
« Last Edit: February 16, 2018, 09:43:58 pm by Radeongas »
 

Online T3sl4co1l

  • Super Contributor
  • ***
  • Posts: 14529
  • Country: us
  • Expert, Analog Electronics, PCB Layout, EMC
    • Seven Transistor Labs
Re: Suggestions for application of High voltage cap.
« Reply #1 on: February 16, 2018, 09:44:42 pm »
Uh... what's the rest of it look like?

If it's a heavy metal box with large studs, it may be pulse rated.  Not quite enough for a quarter shrinker IIRC, but a few of them together, perhaps?

Tim
Seven Transistor Labs, LLC
Electronic design, from concept to prototype.
Bringing a project to life?  Send me a message!
 

Offline Radeongas

  • Newbie
  • Posts: 2
  • Country: no
Re: Suggestions for application of High voltage cap.
« Reply #2 on: February 16, 2018, 09:47:00 pm »
It was used in old analog TV transmitters. Shaped like a cereal box with roughly the same size, two protruding poles with ceramic insulator. The caps are in a garage a couple miles from my location, I had a third but it spilled about 1-2 liters of fluid everywhere and I did not want to drive with the rest because of their fragility.
« Last Edit: February 16, 2018, 09:49:45 pm by Radeongas »
 

Offline Vtile

  • Frequent Contributor
  • **
  • Posts: 993
  • Country: fi
  • Ingineer
Re: Suggestions for application of High voltage cap.
« Reply #3 on: February 16, 2018, 09:52:56 pm »
Transformer oil..
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf