Author Topic: Suggestions for Beginner in Electronics  (Read 14508 times)

0 Members and 1 Guest are viewing this topic.

Offline yashrk

  • Regular Contributor
  • *
  • Posts: 235
  • Country: in
  • A MAKER, AN ENGINEER, A HOBBIES FOR LIFE
    • My Personal Blog
Suggestions for Beginner in Electronics
« on: April 26, 2014, 08:24:31 am »
Hello Brothers,
             This may not be the right place to post but this is necessary for beginner so I posted this here. :-//

             I started this Topic so that the people who are already in to electronics can help beginners like me by guiding us. I really want to know your journey how you got in to electronics, how you masters skills  :phew: and became so good, what different steps you took and what makes you different from other. Please tell me and others how we should study electronics and become a good engineer.

             Please share your story, any small tips or something from your experience may help other in shaping their future.

Thank you.  :-+
Find me and things I'm working on - https://www.yashkudale.com/
Old - https://yashrk.wordpress.com/
 

Offline Whales

  • Frequent Contributor
  • **
  • Posts: 921
  • Country: au
    • Halestrom
Re: Suggestions for Beginner in Electronics
« Reply #1 on: April 26, 2014, 12:10:35 pm »
There are an infinite amount of different ways to think about and approach working with electronics.  If you've become uninterested/bored in (for example) an environment where you are being taught about electronics, or even in your own line of personal research: look for other ways to your goal.  They exist -- you just have to discover them, even if no one else has yet :)

Offline retrolefty

  • Super Contributor
  • ***
  • Posts: 1613
  • Country: us
  • measurement changes behavior
Re: Suggestions for Beginner in Electronics
« Reply #2 on: April 26, 2014, 02:24:05 pm »
 I can share my personal journey in learning electronics. I was always curious and interested in electronics starting as a 10 year old youth in the 50s, reading any electronic magazine I could get a hold of, taring down stuff, and building simple circuits. However it was all rather fractured knowledge and I had no real confidence in what I knew or didn't know.

 Only after enlisting in the Air Force did I gain any real structure in learning electronics. The military tech school training started with 13 weeks of basic electronics theory and lab work based on a 6 hour days, 5 days a week. This was pretty fast based course and if one failed the weekly test the first time you would be put back one class and if failed again they would transfer you to training in washing airplanes, Air Police, or cook schools. After that one started in specific training on the equipment you were going to work on, in my case teletype/crypto maintnenace for another 23 weeks.

 I've seen a few times on E-bay the training material used in past Navy and Air Force electronic basic electronic courses and would not be a bad reference to have if attempting self training.

 
 

Online AndyC_772

  • Super Contributor
  • ***
  • Posts: 3523
  • Country: gb
  • Professional design engineer
    • Cawte Engineering | Reliable Electronics
Re: Suggestions for Beginner in Electronics
« Reply #3 on: April 26, 2014, 02:53:06 pm »
My top tip would have to be: decide what you want to actually design, develop or work on, and then work out what knowledge, tools and equipment you need to work on that project. Think about why you want to learn electronics at all, and go from there.

Seriously... it's amazing how many people post questions which boil down to "I have no clue what I actually want to do, but can someone please tell me what are the best tools for a beginner to have", and the answers inevitably boil down to whatever meter, scope or soldering iron is currently perceived as fashionable. Nobody gains, or provides, any information that's genuinely useful to anybody.

Let's suppose, for example, that what you actually want to do is design yourself an audio amplifier. You'll need to learn about topics that are relevant to that area: audio frequency analogue design (obviously), power supplies, thermal management, grounding, protection circuits and so on. You'll probably want a physically big, powerful soldering iron, a basic multimeter that's nevertheless safe to use on the mains, and an old analogue oscilloscope will serve you well.

Or, if you want to make a device to feed your cat while you're away on holiday, then you'll want to know about microcontrollers, batteries and motors. The tools and equipment you'll need are quite different; you'll want a much smaller soldering iron, and a digital storage scope with plenty of channels. A dirt cheap meter will probably be absolutely fine.

Before you start buying anything at all, download yourself a copy of LTSpice and become familiar with it. Simulated components are great, you never get dry joints, they never blow up, and you can measure anything you like. Tools like this simply weren't available when I was learning the basics; now they are, take full advantage.


Offline yashrk

  • Regular Contributor
  • *
  • Posts: 235
  • Country: in
  • A MAKER, AN ENGINEER, A HOBBIES FOR LIFE
    • My Personal Blog
Re: Suggestions for Beginner in Electronics
« Reply #4 on: April 26, 2014, 06:40:21 pm »
@Whales : Thanx for the reply but seriously when I get bored by electronics I just watch Dave's video he has energy of 10 year old man and if life gets more frustrating I just watch Ironman 3.  8)

@pereczes : On your way buddy  :P

@retrolefty : You are lucky man, you found your passion at the age of 10, I was like in my Jr College I was taking Comp. Sci. classes and after that I was searching for good colg for aerospace engineering then looking back in my past I realized I always was fond of electonics gadget and knowing how they really work then after all that I ended up going to electronics and found what a fun it is to make stuff and its so easy.

@AndyC_772 : Bro u nailed it, I am actually going through similar type of feeling like what I really want to do (in electronics) like in my 1st year I was working with arduino and I made impressive project using it, then at the middle of my 2nd year I was making cold storage and energy generators and now I am working on solar cell, Li-Po batteries and power electronics stuff I seriously enjoyed each of them and I succeeded in all of them.  :-// And now I don't know what should I focus on as my carrier ?
Find me and things I'm working on - https://www.yashkudale.com/
Old - https://yashrk.wordpress.com/
 

Offline VK5RC

  • Supporter
  • ****
  • Posts: 2364
  • Country: au
Re: Suggestions for Beginner in Electronics
« Reply #5 on: April 26, 2014, 11:25:07 pm »
For me electronics is not my job but a passionate hobby,  I have found amateur radio a great stimulus to investigate different aspects of electronics but also radio propagation etc.  A large number of areas are needed to be covered,  dc supplies,  amplifiers,  antennas,  microphones etc.  There are some exams to sharpen your knowledge and lots of clubs with experienced people to encourage /assist.  I think the best is a combination of practical /hands on stuff and theory.  In today's crazy world,  a piece of paper (qualifications) can be needed in some circumstances but practical skills essential,  Dave is a good example,  practical and but serious theoretical knowledge behind. :-)
Whoah! Watch where that landed we might need it later.
 

Offline mjkuwp

  • Supporter
  • ****
  • Posts: 222
  • Country: us
  • mechanical engineering defector
    • The Mz Lab
Re: Suggestions for Beginner in Electronics
« Reply #6 on: April 27, 2014, 01:57:05 am »
I started learning electronics when I was 40 (4 years ago).  My cruise control module broke and I decided I wanted to repair it myself.  Going back in time.... I had the Radio Shack ~160 in 1 kit when I was a kid.  It was horrible for learning - the book made no effort to teach and I never could figure out what was going on.  Because of that I thought electronics was too hard and did not pursue that degree. : (

The steps I took, roughly.

1. Ohms law, the obvious things that many people do tend to know.
2. Learn about forward voltage drop and how to size a resistor for an LED and why.
3. Learn how to drive this LED from a BJT transistor.
4. This book:
http://www.amazon.com/Electrical-Engineering-101-Third-Edition/dp/0123860016

etc...

found out the basics are actually easy when presented in the right way.

I think the Radio Shack kit starts out at step 1 with a 2-transistor circuit. crazy.

The cruise control module turned out to have a cracked solder joint on the crystal.  It was a tall package and obviously had fatigued from so many vibration cycles.  I did the troubleshooting the very long way around but experienced guys probably would have checked that tall part first.
 

Offline yashrk

  • Regular Contributor
  • *
  • Posts: 235
  • Country: in
  • A MAKER, AN ENGINEER, A HOBBIES FOR LIFE
    • My Personal Blog
Re: Suggestions for Beginner in Electronics
« Reply #7 on: April 28, 2014, 02:58:06 pm »
@VK5RC : are radios difficult ? I am afraid of them   

@mjkuwp : thanx for your story, I seen people not learning programming because they are now graduated from college. Hats-off sir  :clap:
Find me and things I'm working on - https://www.yashkudale.com/
Old - https://yashrk.wordpress.com/
 

Offline VK5RC

  • Supporter
  • ****
  • Posts: 2364
  • Country: au
Re: Suggestions for Beginner in Electronics
« Reply #8 on: April 29, 2014, 05:06:50 am »
Radios are as hard or as easy as you want to make it, Amateur radio often is based around Radio Clubs, whose members are often happy to help others.
Before you can transmit, you usually need to get a licence, often there is an entry level licence, in Australia it is called the Foundation licence and can usually be obtained after a weekend seminar on some basic electronics e.g. ohms law, frequency, wavelength, velocity, some safety (mains voltage), some Government regulations and how to turn on and tune a transmitter to its antenna. Usually with the entry level axam you are not allowed to alter the transmitter, but in Australia the other two levels of licence ( quite a bit more study, transistor function, impedance calculation matching etc) you are then allowed to build your own equipment.
Some amateur guys don't touch the electronics at all, enjoy talking to others, some build their own microwave gear!
My best achievement so far was to have contact with a fellow in New York USA (from Australia) with 0.1W transmitter power, It did take a while (10mins) and used a pretty hot antenna and some complex computer programme to decipher the signal from the noise (JT65HF). I have also used one of the Amateur radio satellites to talk to another Ham.
If you are interested in radio, you may have a radio club nearby, ring up and if you can go along.
Whoah! Watch where that landed we might need it later.
 

Offline vk6zgo

  • Super Contributor
  • ***
  • Posts: 5151
  • Country: au
Re: Suggestions for Beginner in Electronics
« Reply #9 on: April 29, 2014, 06:22:38 am »
@VK5RC : are radios difficult ? I am afraid of them   

@mjkuwp : thanx for your story, I seen people not learning programming because they are now graduated from college. Hats-off sir  :clap:

In your country,there are many enthusiastic Amateur Radio operators,many of whom are very active in making "homebrew" equipment,as Commercially made radios are quite expensive.
Radios aren't difficult,just a bit different.;D

My suggestion:- Go to the Public Library & look through their Electronics section.
If you can find the ARRL Handbook,or the RSGB Manual,you can learn a lot.
In any case:- Read!,Read!,Read!

Websites?-----Many of them just seem to want to show you how to use an Arduino,or Op Amps.
No doubt,very worthwhile stuff,but not really Basic Theory.
All About Circuits isn't bad,although some on this forum will  get apoplexy from this statement.

Look at other people's schematics,& real physical equipment before you think of designing anything.

Don't try to run before you can walk---we get dozens of people wanting to do something ambitious when they don't even know Ohm's Law!





 

Offline nanofrog

  • Super Contributor
  • ***
  • Posts: 5448
  • Country: us
Re: Suggestions for Beginner in Electronics
« Reply #10 on: April 29, 2014, 06:37:26 am »
I've seen a few times on E-bay the training material used in past Navy and Air Force electronic basic electronic courses and would not be a bad reference to have if attempting self training.
FWIW, the US Navy Electricity and Electronics Training Series (NEETS), is available for free.  :)
 

Offline yashrk

  • Regular Contributor
  • *
  • Posts: 235
  • Country: in
  • A MAKER, AN ENGINEER, A HOBBIES FOR LIFE
    • My Personal Blog
Re: Suggestions for Beginner in Electronics
« Reply #11 on: April 29, 2014, 12:19:33 pm »
@nanofrog and @vk6zgo thank you for all the info

but guy donno I am lazy or what but I don't like to read I get things better when some one explains me personally or on videos like Dave.
I am trying hard to change it by participating in forms and reading books but still an suggestion? dose any of you have such kind of problem ?
Find me and things I'm working on - https://www.yashkudale.com/
Old - https://yashrk.wordpress.com/
 

Offline retrolefty

  • Super Contributor
  • ***
  • Posts: 1613
  • Country: us
  • measurement changes behavior
Re: Suggestions for Beginner in Electronics
« Reply #12 on: April 29, 2014, 02:08:11 pm »
@nanofrog and @vk6zgo thank you for all the info

but guy donno I am lazy or what but I don't like to read I get things better when some one explains me personally or on videos like Dave.
I am trying hard to change it by participating in forms and reading books but still an suggestion? dose any of you have such kind of problem ?

 Hands on training can be very a helpful and useful addition to one's personal growth in this field, however learning electronics theory cannot be accomplished just by observations and trying to memorize rules and examples. Reading, math, and learning in a structured manner is the only way you can gain the basics required to move on and up in electronics. At least that is my opinion.

 
 

Offline yashrk

  • Regular Contributor
  • *
  • Posts: 235
  • Country: in
  • A MAKER, AN ENGINEER, A HOBBIES FOR LIFE
    • My Personal Blog
Re: Suggestions for Beginner in Electronics
« Reply #13 on: April 29, 2014, 03:32:12 pm »
@retrolefty  do you have any solution over that ?
Find me and things I'm working on - https://www.yashkudale.com/
Old - https://yashrk.wordpress.com/
 

Offline retrolefty

  • Super Contributor
  • ***
  • Posts: 1613
  • Country: us
  • measurement changes behavior
Re: Suggestions for Beginner in Electronics
« Reply #14 on: April 29, 2014, 03:39:28 pm »
@retrolefty  do you have any solution over that ?

Sure, download and start to study the free reference given in reply #11.
 

Offline zimzom

  • Regular Contributor
  • *
  • Posts: 63
  • Country: ph
Re: Suggestions for Beginner in Electronics
« Reply #15 on: April 29, 2014, 04:14:05 pm »
What I did was this,

I first thought about what I wanted to achieve/do project wise. I was interested in calculators and old computers. So I looked at the internet and what other people had done before, and if the projects were similar to what I wanted. After that I looked at all the websites I could find that related to the project I wanted to do.

My advice is pick a project that makes you grow, what does not kill you makes you stronger. going for something that requires a lot of skills or know how you do not have has the potential to have a far greater payoff - even if you do not complete it. The amount you will have learned will help you much more than say a blinky project. Try and break the project into modules, this gives you a series of project milestones and keeps your morale up. Using a modular approach as you learn better ways to tackle a problem you can always go back and redesign your earlier modules. This has a good benefit also. But it should be remembered that you can fall into a trap of never finishing.

Second, try and do as much of the work yourself, you will learn more this way than relying on someone else's code ect. I am not saying build everything from scratch but from a learning perspective you will learn more from studying the design of a module, then re-implementing it in your own way than just getting a widget off the shelf that you don't understand and plugging it in. Its a learning exercise not a commercial project in that sense.

Keeping these things in mind, I then studied a general EE 101 class, not the MIT one - but something from a community college/technical college level. Much slower pace and more practical with lots of examples. There were extra things I needed to learn that were not covered in this course - but in fairness by this point you know what areas you need to read up on. All the books, videos are available online, Next thing I did was down load as many of the data books online I could find.

Next was the bell labs books, I found these really useful on giving historical context, you can find out why things are now the way they are, how telecommunications and electronics evolved and the many dead ends along the way. It sounds boring, and honestly it is but its so worth it. Its like having a room full of grey beards brains in a jar. Just waiting for you to read there reports.

Another excellent set of books that are available for free online are the MIT rad lab books. Compaired to modern books these were written in a far more accessible way to my mind. The people that wrote these books knew there subject inside out and had worked on practical systems.

Next I would look at the archive.org site, there are many electronics books available there to download. you find the books relivant to your project and download them. after looking through, if you feel you need to research another area go get these books also.

Now go back and watch the 101 classes, you should feel very confident about the material. and probably you will pick up things you missed the first time you watched the lectures.

Read the data-books, this is how you will become acquainted with the 1000ft view of companies product lines, and its the beginnings of finding components you are comfortable with and that you know inside out. Read all the errata sheets and application notes you can. you can avoid lots of heart ache by reading these notes. Errata notes especially are written in the blood sweat and tears of a prior guys sleepless nights with the component you have in your hands. Perhaps take a moment, and say a silent thank you to that guy where-ever he is.

As much as possible study the designs of others, most projects are going to have been tackled before by someone else - some will be good, others not so good. But you can save a lot of time and avoid some of the gotchas and issues you did not consider before. With the calculators for example, there are many excellent tear-downs, articles on the various design families so a significant amount of time has been spent just looking at what other companies did and why. Its like a design masterclass for free.

Thats one of the things I like about the EEVblog videos, you can see best practices and get a expert opinion on a wide range of products, while applications and specs will probably be different for your project. The overall lessons apply across application. One of the nice things about a hobby project is nobody is going to run you over the coals for say designing a state of the art power supply with overspec components when you could have probably got away with a basic design with low-mid range parts. Its up to you.

Now look at your project, is the approach/ideas you had still viable with what you know now? if not go back and make it right. now look at breadboarding, testing, get the circuit designed. Now check with a friendly grey beard. you should get a bunch of guidance and advice on what to do to overcome some of the problems you probably have encountered. Now go back and research what the grey beard has told you. make the changes but try and understand why the changes are better. Go back and look at the books.

You repeat the process until all the modules are in a functional state, now test the overall project, got problems, research, test, ask the grey beard.

at the end of the process you will have learned a ton about your chosen projects subject area/field.

Now its time to move on and study an area that interests you in EE and start the whole process again.

Good luck, if you are absent minded like me - write as much about what you are doing down in a notebook - get a crappy quality one that you wont mind making mistakes and writing things in. putting stuff on the Internet is good also as you can get a ton of advice and help from people.
 

Offline yashrk

  • Regular Contributor
  • *
  • Posts: 235
  • Country: in
  • A MAKER, AN ENGINEER, A HOBBIES FOR LIFE
    • My Personal Blog
Re: Suggestions for Beginner in Electronics
« Reply #16 on: April 29, 2014, 05:28:54 pm »
@zimzom thanx a lot for your efforts of sharing your views I really believe it will help me and any one who read it in future thanx a lot buddy  :clap:
Find me and things I'm working on - https://www.yashkudale.com/
Old - https://yashrk.wordpress.com/
 

Offline yashrk

  • Regular Contributor
  • *
  • Posts: 235
  • Country: in
  • A MAKER, AN ENGINEER, A HOBBIES FOR LIFE
    • My Personal Blog
Re: Suggestions for Beginner in Electronics
« Reply #17 on: May 01, 2014, 11:13:55 am »
Any else want to share ?
Find me and things I'm working on - https://www.yashkudale.com/
Old - https://yashrk.wordpress.com/
 

Offline Fank1

  • Regular Contributor
  • *
  • Posts: 159
Re: Suggestions for Beginner in Electronics
« Reply #18 on: May 01, 2014, 08:55:15 pm »
I also started when I was about 10.
Got an amateur license at 12.
College then avionics tech.
I not work in power distribution but I still do RF etc at home.

The biggest problem I have noticed on this site is that everyone wants to run before they learn how to walk.
That is they have a project or problem and want someone else to find the answer instead of learning the basics and figuring it out from there.

The Radio Amateur Hand Book is an excellent reference and learning material and is written so anyone can understand it.
Get a newer copy and put it on the shelf. Then find an old used copy, tear out the project sections and throw them away.
Read the rest until you understand the basics, THEN you are on your way.
 

Offline flesh

  • Newbie
  • Posts: 1
Re: Suggestions for Beginner in Electronics
« Reply #19 on: May 01, 2014, 10:57:04 pm »
Some great advice on this thread thanks to all contributors.

I am in a similar boat. I am very interested in electronics and in electronics and sound.

Similar to what you say Yashrk I have tried to read as much as possible but really struggle with learning through text. I just cant seem to absorb what I am reading and have to read each sentence, paragraph and page a dozen times before my brain can translate the words into meaning. Whereas on the other hand if some one reads the page to me or I watch a video or someone shows me something I get it in a flash. I have accepted that it is just the way it is for me and have come up with a plan to learn which may or may not help you.

I will first get up to scratch with maths which from my research so far (and as already mentioned) is a great foundation for electronics education. i keep seeing Calculus everywhere I look into learning electronics and tbh that scares the shit out of me but if its a must then OK then. To combat my struggle with reading maths should not be a problem so much since there is many structured module type learning videos online. Once I feel I have done all I can in that respect I will then seek a private tutor to go through some maths exam papers with me and make sure I have a good understanding of what I need to be clear on. There are many websites with listed tutors in any field and fortunately I have seen a few tutors who specialise in maths and electronics.

The next step for me will be to repeat step one but with electronics as the focus, I will watch as many videos as I can and write notes on what I dont understand. I will then start to go through a training manual such as the navy one previously mentioned and for maybe one hour a week have the tutor come help me with what I don't understand.

I think as mentioned the hard part for a beginner is narrowing down the most important aspects of electronics in your chosen field.
Sorry to hijack your thread.
 

Offline pickle9000

  • Super Contributor
  • ***
  • Posts: 2132
  • Country: ca
Re: Suggestions for Beginner in Electronics
« Reply #20 on: May 02, 2014, 12:20:18 am »
I thinks you'd find many old timers on the forum started with something like this:

http://www.elenco.com/product/productdetails/project_labs=NTU=/200-in-1_electronic_project__lab=Mjg1

You can still find them, they still make them. My brother "borrowed" one of my kits and I'm still trying to get it back. I was 12 when I got it and he borrowed it when he was in his 40's. Yes he is still playing with it, not for his kid.
 

Offline EEVblog

  • Administrator
  • *****
  • Posts: 30596
  • Country: au
    • EEVblog
Re: Suggestions for Beginner in Electronics
« Reply #21 on: May 02, 2014, 12:35:34 am »
The way it generally works (outside of formal study), is you get into whatever branch of electronics is used in whatever "thing" that interests you. E.g. You like music, you might start with building an amplifier or something etc.
Then you acquire the tools and start branching out into more and more aspects of electronics (again, generally what interests you).
And through all of this you learn by having to solve problems and troubleshoot things, that's where the real learning happens.
e.g. if you buy a kit and then solder it and it works first go, ok great, but what have you learned? You've learned to solder and construct.
But if you build that same thing and it doesn't work, then you have to learn why it doesn't work, track it down, learn what caused it, and how how to fix it.
So I hope your next project doesn't work!
 

Offline EEVblog

  • Administrator
  • *****
  • Posts: 30596
  • Country: au
    • EEVblog
Re: Suggestions for Beginner in Electronics
« Reply #22 on: May 02, 2014, 12:36:35 am »
Any else want to share ?

My story is here:
 

Offline yashrk

  • Regular Contributor
  • *
  • Posts: 235
  • Country: in
  • A MAKER, AN ENGINEER, A HOBBIES FOR LIFE
    • My Personal Blog
Re: Suggestions for Beginner in Electronics
« Reply #23 on: May 02, 2014, 11:02:30 am »
@Fank1 Thanks for your reply , you stated perfectly what mistake a beginner make. I have noticed many problem with mine studying methods like yesterday I was reading about capacitors, inductors and impedance (from The Art of Electronics) and I notices there is lot more I didn't knew about them, which I just skipped early on thinking like I know everything about them. And there are some beautiful analogies given in that book like Filters where called "frequency dependent voltage divider" which like makes a clear picture of its working in our mind.

@flesh True bro, we are on same boat  8) . Like I mentioned above I love books like The Art OF Electronics but it really needs lots of focus for understanding the concepts from them. But ya my learning habits are bit different then yours, while leaning electronics I like to keep my option open I use all resources I have like books, internet, software and I make circuit on the spot and test them or use MultiSim if I don't have components (which is most of the time).
           Not having a electronics teacher give me hard time. But due to people like Dave and you guys who help to build such a big community is really very helpful.

@pickle9000 thank you for sharing the link. Well the only thing I hate about such kits is that they are like Magic tricks," Waala!!! It works"  :clap: but they don't teach you how it works or go into details like why we have to use components used in them.
Find me and things I'm working on - https://www.yashkudale.com/
Old - https://yashrk.wordpress.com/
 

Offline yashrk

  • Regular Contributor
  • *
  • Posts: 235
  • Country: in
  • A MAKER, AN ENGINEER, A HOBBIES FOR LIFE
    • My Personal Blog
Re: Suggestions for Beginner in Electronics
« Reply #24 on: May 02, 2014, 11:27:31 am »
@EEVblog Sir your wisdom really helped many of us. And like you mentioned sir, really we have to make stuff outside of our formal studies, hear in my college there are like hundreds of students who are taking electronics degree and even if I somehow topped in my college there are like thousands of other colleges all over India having their toppers so getting in to industry here is very hard unless student loves electronics and practices it on daily basis.
   Thank you sir for your story.  :-+

@wilfred thanx for sharing  ;)
Find me and things I'm working on - https://www.yashkudale.com/
Old - https://yashrk.wordpress.com/
 

Offline madshaman

  • Frequent Contributor
  • **
  • Posts: 699
  • Country: ca
  • ego trans insani
Re: Suggestions for Beginner in Electronics
« Reply #25 on: May 02, 2014, 01:21:32 pm »
No time for my story ATM, but I have a tip.  Find yourself a used copy of this book:
To be responsible, but never to let fear stop the imagination.
 

Offline yashrk

  • Regular Contributor
  • *
  • Posts: 235
  • Country: in
  • A MAKER, AN ENGINEER, A HOBBIES FOR LIFE
    • My Personal Blog
Re: Suggestions for Beginner in Electronics
« Reply #26 on: May 02, 2014, 07:31:41 pm »
@madshaman thanx for the tip  ;) . But can you tell what do you mean by ATM?
Find me and things I'm working on - https://www.yashkudale.com/
Old - https://yashrk.wordpress.com/
 

Offline 22swg

  • Frequent Contributor
  • **
  • Posts: 274
  • Country: gb
Re: Suggestions for Beginner in Electronics
« Reply #27 on: May 02, 2014, 09:33:29 pm »
For me it was the buzzz  of making something out of  components and it worked, I had the good luck to have a wizard instructor at our companies training school, it was ancient stuff then, transistors and nixie tubes but when logic ic's started reaching the field I grabbed a few 7400 chips and  experimented. You need to make stuff , I have seen good technically educated students who knew the lot, but could not read a resistor code or were frightened of touching 12 volts !   
Check your tongue, your belly and your lust. Better to enjoy someone else’s madness.
 

Offline madshaman

  • Frequent Contributor
  • **
  • Posts: 699
  • Country: ca
  • ego trans insani
Re: Suggestions for Beginner in Electronics
« Reply #28 on: May 02, 2014, 09:35:02 pm »

@madshaman thanx for the tip  ;) . But can you tell what do you mean by ATM?

At the moment.
To be responsible, but never to let fear stop the imagination.
 

Offline pickle9000

  • Super Contributor
  • ***
  • Posts: 2132
  • Country: ca
Re: Suggestions for Beginner in Electronics
« Reply #29 on: May 02, 2014, 09:58:44 pm »
@pickle9000 thank you for sharing the link. Well the only thing I hate about such kits is that they are like Magic tricks," Waala!!! It works"  :clap: but they don't teach you how it works or go into details like why we have to use components used in them.

The circuit descriptions in these kits are actually very good. The best thing about them is you get to see a wide variety of basic circuit's build them up. You can then change component values to see what happens. Yes it's simplistic but you said hands on with easy to follow instructions.
 

Offline yashrk

  • Regular Contributor
  • *
  • Posts: 235
  • Country: in
  • A MAKER, AN ENGINEER, A HOBBIES FOR LIFE
    • My Personal Blog
Re: Suggestions for Beginner in Electronics
« Reply #30 on: May 03, 2014, 11:19:20 am »
@22swg mine teachers are the same

@pickle9000  :-+
Find me and things I'm working on - https://www.yashkudale.com/
Old - https://yashrk.wordpress.com/
 

Offline electrolux

  • Regular Contributor
  • *
  • Posts: 243
  • Country: gb
    • Photography
Re: Suggestions for Beginner in Electronics
« Reply #31 on: May 04, 2014, 02:56:22 pm »
When you build a curcit expect it NOT to work |O, it's murphy's law :-DD.
The funniest thing about this signature is that by the time you realize it doesn't say anything its too late to stop reading it.
 

Offline yashrk

  • Regular Contributor
  • *
  • Posts: 235
  • Country: in
  • A MAKER, AN ENGINEER, A HOBBIES FOR LIFE
    • My Personal Blog
Re: Suggestions for Beginner in Electronics
« Reply #32 on: May 04, 2014, 06:28:03 pm »
@electrolux  "murphy's law" or "Daves Law" ?
Find me and things I'm working on - https://www.yashkudale.com/
Old - https://yashrk.wordpress.com/
 

Offline retrolefty

  • Super Contributor
  • ***
  • Posts: 1613
  • Country: us
  • measurement changes behavior
Re: Suggestions for Beginner in Electronics
« Reply #33 on: May 04, 2014, 07:33:32 pm »
My experience with building personal electronic stuff is if it's completely digital it almost always works from the start, however if it's all or even a little analog stuff on it, it almost never works at the start.

 

Offline yashrk

  • Regular Contributor
  • *
  • Posts: 235
  • Country: in
  • A MAKER, AN ENGINEER, A HOBBIES FOR LIFE
    • My Personal Blog
Re: Suggestions for Beginner in Electronics
« Reply #34 on: May 06, 2014, 12:44:42 pm »
@retrolefty it happened to me also
Find me and things I'm working on - https://www.yashkudale.com/
Old - https://yashrk.wordpress.com/
 

Offline yashrk

  • Regular Contributor
  • *
  • Posts: 235
  • Country: in
  • A MAKER, AN ENGINEER, A HOBBIES FOR LIFE
    • My Personal Blog
Re: Suggestions for Beginner in Electronics
« Reply #35 on: May 07, 2014, 10:04:23 am »
How can we share this thread in other categories ? Really many people there would love to share their stories and advice with beginners !!
Find me and things I'm working on - https://www.yashkudale.com/
Old - https://yashrk.wordpress.com/
 

Offline yashrk

  • Regular Contributor
  • *
  • Posts: 235
  • Country: in
  • A MAKER, AN ENGINEER, A HOBBIES FOR LIFE
    • My Personal Blog
Re: Suggestions for Beginner in Electronics
« Reply #36 on: February 21, 2015, 07:29:52 am »
Come on guys share some more stories !!!
Find me and things I'm working on - https://www.yashkudale.com/
Old - https://yashrk.wordpress.com/
 

Offline retrolefty

  • Super Contributor
  • ***
  • Posts: 1613
  • Country: us
  • measurement changes behavior
Re: Suggestions for Beginner in Electronics
« Reply #37 on: February 21, 2015, 07:47:01 pm »
Come on guys share some more stories !!!

OK
 A ham radio operator walks into a bar with a parrot on his shoulder.
The bartender asks "where did you get that"?
"Dayton of course" says the parrot.

Some might need to be a U.S. Ham to get it, sorry.
 

Offline Amra

  • Contributor
  • Posts: 14
  • Country: us
Re: Suggestions for Beginner in Electronics
« Reply #38 on: February 21, 2015, 10:25:16 pm »
I started my journey by playing laser tag. 

We started with a couple world of wonder lazer tag sets (still have a new in the box set), eventually graduated to an 'electronic survivor shot' setup (my favorite), and tried many others along the way. Photon, Laser Challenge, Sega Lock-On, Laser Challenge Pro, as well as playing at the professional places that kept stats on little keyfobs.

Eventually we got into customizing our guns, by purchasing nerf guns or other gun models (video game console guns for example) and transplanting the electronics from store bought guns into the new cases. The internet was growing every day at this point, and using AOL we were able to scour the internet and found several other people with a similar interest.  Eventually we found a few really industrious people who even went so far as to build their own electronics from scratch, and they had even taken the time to give a basic explanation of how the gun worked, and how you could build a basic laser tag gun from scratch with a couple 555 timers. Later we found someone who went the extra ten miles and build their own circuit using a PIC16F84A microcontroller.  At this point, my eyes were large and glistening.

So my journey began, and I found along the way this project offered a lot of education in a very small package.  Frequency modulation, LED driving, Audio for the sound effects, microprocessors (or timers), assembly or C programming (if using micros), control systems, infrared communication, optics for increasing range/controlling spread... etc etc.

As far as beginner projects went, I picked a doozy!  :-DD

Eventually, the laser tag craze died down, and most of my collection was relegated to a few totes in the garage.  I still have them of course, and I have many custom guns, but its been a long time since I played.  With that project a great many other projects suddenly became possible and my passion for electronics was in full bloom.

Eventually I went to college and got my associates in EET.  I still have every plan to go for my bachelors, but currently I am still paying off my student loans (over half-way done).
 

Offline GreyWoolfe

  • Super Contributor
  • ***
  • Posts: 3339
  • Country: us
  • NW0LF
Re: Suggestions for Beginner in Electronics
« Reply #39 on: February 22, 2015, 02:19:36 am »
Come on guys share some more stories !!!

OK
 A ham radio operator walks into a bar with a parrot on his shoulder.
The bartender asks "where did you get that"?
"Dayton of course" says the parrot.


 :-+ :-DD.  Never been there but someday.
"Heaven has been described as the place that once you get there all the dogs you ever loved run up to greet you."
 

Offline Alex Eisenhut

  • Super Contributor
  • ***
  • Posts: 2146
  • Country: ca
  • If you can buy it for 4$ on eBay, why design it?*
Re: Suggestions for Beginner in Electronics
« Reply #40 on: February 22, 2015, 02:36:02 am »
Come on guys share some more stories !!!

One day I turned on my Commodore 64, and it didn't boot up. I had to replace the 7805 regulator.

You didn't ask for interesting stories.
*Except AC/DC adapters on eBay. Avoid them all!
 

Offline yashrk

  • Regular Contributor
  • *
  • Posts: 235
  • Country: in
  • A MAKER, AN ENGINEER, A HOBBIES FOR LIFE
    • My Personal Blog
Re: Suggestions for Beginner in Electronics
« Reply #41 on: February 23, 2015, 10:41:29 pm »
Thanx for sharing @Amra

and @retrolefy @Alex Eisenhut  :-DD  Nice one!! :clap:
Find me and things I'm working on - https://www.yashkudale.com/
Old - https://yashrk.wordpress.com/
 

Offline Vincent

  • Contributor
  • Posts: 23
  • Country: ca
    • The Vince Electric Laboratory
Re: Suggestions for Beginner in Electronics
« Reply #42 on: February 25, 2015, 03:27:47 am »
I didn't get into electronics as a hobby the way most did. I was actually introduced to residential electricity first when I was 5 or 6 years old. By age 14 I understood the relation between voltage, current and resistance. Indirectly I knew the Ohm's law! I was lucky enough to have a private teacher with me, one of my cousins who's 10 years older than me. He was in technical school to become an electrician, and was more than pleased to teach me the basics of electricity, using what is still today my favourite part of electricity as a whole, line power! I did zap myself quite a few times, but I was taught how someone can electrocute themself to death, so I made sure I could never GROUND myself.

It's only in the last few years that I became more interested in electronics, especially after technical school, where I had learned the basic electronic components, including the op-amp (though I'm only starting to fully understand all the little details about them!). I already have several projects I want to start when I have the time and all the tools. However I was never a huge fan of digital electronics, most of those projects involve analog electronics LOL. One of them will be about something that interested me quite a lot back in the days before the Internet arrived at home, when television systems were still NTSC. I used to read books about televisions and how they work, the raster and all that. Now that I have the Internet, and a book explaining how television systems work, I want to build my own television system, in which I would replace the cathode ray tube by a system of rotating mirror drums. It did exist back in the 1930s and was known as the "Scophony" system. My goal is to port the system to the NTSC standard.

Now that I opted for diesel mechanics as a profession, I have the basic knowledge to design the mechanical part of such a system too! The biggest challenge will be to design a mirror drum for the horizontal scan capable of operation at over 100 000 RPM  :o  Magnetic bearings are what I have in mind, but I won't reveal too many details, that'll be for another day!

But if you're looking for beginner projects, don't think about insane projects like mine  :scared:
 

Offline Seekonk

  • Super Contributor
  • ***
  • Posts: 1836
  • Country: us
Re: Suggestions for Beginner in Electronics
« Reply #43 on: February 25, 2015, 03:17:48 pm »
I was in the third grade when my school had a book fair to raise money.  I picked this nice hard bound book on electronics.  Teacher told my mother it was age inappropriate, she didn't listen.  I read a lot, there was no one to talk to.  I was always being chased out of the town dump.  A screwdriver and wire cutter let me dissect TV's there.  Had my first paying electronics job repairing transistor organs.  This was 1964 and I was 14.  My brother who was older had to drive me on service calls, that cut down on the profit.  I spent more time in bars at 15 with bands than I ever did when I reached drinking age.  I was back stage with the Cowsills, don't tell me I wasn't cool.  First amp was a couple 807's running 450V.   I think the secret was a lack of parental supervision.  A child is a sponge if it is something they are interested in.

They did an experiment in India at a remote village with no electric.  They set up a computer kiosk and just left, no instructions at all.  Keystroke activity was monitored.   It ramped up and then slowed down for a while before increasing again.   Later the researchers  asked why it slowed down.  The villagers said,  We had to stop to learn English.
 

Offline hurricanehenry

  • Regular Contributor
  • *
  • Posts: 60
Re: Suggestions for Beginner in Electronics
« Reply #44 on: September 15, 2016, 10:07:17 pm »
Next was the bell labs books, I found these really useful on giving historical context, you can find out why things are now the way they are, how telecommunications and electronics evolved and the many dead ends along the way. It sounds boring, and honestly it is but its so worth it. Its like having a room full of grey beards brains in a jar. Just waiting for you to read there reports.

Another excellent set of books that are available for free online are the MIT rad lab books. Compaired to modern books these were written in a far more accessible way to my mind. The people that wrote these books knew there subject inside out and had worked on practical systems.

I found the MIT book but not the Bell Labs books. Can anyone point me in the right direction?

Here are the MIT books I found:

https://www.jlab.org/ir/MITSeries.html
 

Offline eugenenine

  • Frequent Contributor
  • **
  • Posts: 812
  • Country: us
Re: Suggestions for Beginner in Electronics
« Reply #45 on: September 16, 2016, 01:39:49 am »
I started out with those radio shack kits where you bend the spring over and stick in the wire.  Those and tearing apart anything anyone would give me.
I'd get books and magazines for the local library.  In a small town the library would order anything I found interesting.
Later on in junior high school my parents subscribed to McGraw Hill's contemporary electronics series.  Every 4 months you got a three ring binder and one module then the other three months you got one more module to add to the binder.  Each module was a cassette tape, a stack of papers for the lesson and some components.  Each module would add to the first so you needed to keep all the components for the first.
Starting high school our school divided the class up between college prep, sports scholarship and the rest of us who were 'not college material' were sent to the vocational center.  I choose the electronic program there and we had a brand new teacher who decided the class wasn't going to be a swap tubes in the donated tv's and taught it like college prep class.  He told me I should at least go to DeVry.  For those outside the US, DeVry is a private for profit college which probably doesn't have the prestige of the big names but doesn't have all the BS of the big names either.
After college I ended up in an IT career and have been messing with electronics at home since.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf