| Electronics > Beginners |
| Switching from Nicad battery to Lipo: Am I doing this right? |
| << < (7/7) |
| Nohippychicks:
As an update, I got the Adafruit charge circuit installed and everything seems to be running just fine now. I haven't put the case of the battery back together yet, so everything is delicately hooked together while I go through a discharge cycle of the battery, then a bunch of on/off cycles of the radio before I make things a little more permanent and start playing around with this thing to see if I can get a radio check with one of my other radios. --- Quote from: TERRA Operative on July 31, 2018, 01:07:10 pm --- I like these generic ones, same as what you used, but without the protection circuit. https://www.ebay.com/sch/i.html?_from=R40&_nkw=tp4056 --- End quote --- Great, thanks!! |
| Navigation |
| Message Index |
| Previous page |