Author Topic: Tektronix TLA 614 CMOS or NVRAM location  (Read 351 times)

0 Members and 1 Guest are viewing this topic.

Offline gearheadgeekTopic starter

  • Newbie
  • Posts: 4
  • Country: us
  • If its not broken still tear it apart
Tektronix TLA 614 CMOS or NVRAM location
« on: March 29, 2024, 07:23:13 am »
Hello people I will cut straight to the point. I acquired and Tek TLA 614 with a broken screen after determine it can be fixed I got a screen but what I wanted to do is the same thing I did to my TLA 704 is upgrade to a external CMOS battery and a SSD drive and the 704 went off without a hitch no problem but the 614 well I searched the internet for a battery location but could not find one but I did find out about the NVRAM chip. I seen where people replace those but that might be above me. I'm just a old tinker who like to take things apart to see how they work or fix them and give them away. do you think you guys could help me on this it would be much appreciated
             thanks in advance
 

Offline m k

  • Super Contributor
  • ***
  • Posts: 2009
  • Country: fi
Advance-Aneng-Appa-AVO-Beckman-Data Tech-Fluke-General Radio-H. W. Sullivan-Heathkit-HP-Kaise-Kyoritsu-Leeds & Northrup-Mastech-REO-Simpson-Sinclair-Tektronix-Tokyo Rikosha-Triplett-YFE
(plus lesser brands from the work shop of the world)
 

Online aliarifat794

  • Contributor
  • Posts: 49
  • Country: bd
Re: Tektronix TLA 614 CMOS or NVRAM location
« Reply #2 on: April 05, 2024, 08:50:09 pm »
Replacing the NVRAM chip is an option. However, it's not at all easy.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf