Electronics > Beginners
Transistor compatibility for task.
(1/1)
sureshot:
I'm looking at using a different type of transistor as a voltage linear regulator boost transistor. I'd normally use a TIP147 or a TIP36C transistors. I've come across another darlington pnp transistor, the MJH11021, but it's Collector−Emitter Sustaining Voltage is 250 volts. Would that make it unsuitable as a regulator current boost transistor ? All the other parameters in the data sheet are not to far off the TIP147 specs. It has a high wattage rating of 150 watts, as opposed to the TIP147's 125 watts. It's collector current maximum is 5 Amps higher also. Any help appreciated. The data sheet is below for the transistor I'm thinking of trying.
sureshot:
Thanks for your reply. I will give it a go, it just looked a bit more robust in terms of power ratings. Thanks again.
Navigation
Message Index
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod