With a current m-firmware:
TIP130: NPN, h_FE 19, freewheeling diode, R_BE 7.723 kOhms, V_BE 2.299 V
TIP135: PNP, h_FE 26, freewheeling diode, R_BE 4.789 kOhms, V_BE 904 mV
Is it sufficiently obvious that h_FE and V_BE need to be taken with a grain of salt when there's an R_BE? Or would it better to suppress the output of h_FE and V_BE in case of an R_BE?
BTW, the firmware measures h_FE in common emitter and common collector setup and keeps the higher h_FE value.