EEVblog Electronics Community Forum

Electronics => Beginners => Topic started by: MITTS on June 09, 2015, 12:45:10 am

Title: True RMS Current Measurement
Post by: MITTS on June 09, 2015, 12:45:10 am
Hi guys,
Would a Fluke 87V be displaying a True RMS current reading if a i200s Clamp is being used?
TIA
Title: Re: True RMS Current Measurement
Post by: dom0 on June 09, 2015, 08:15:30 am
If you put it into AC Volts mode.
Title: Re: True RMS Current Measurement
Post by: MITTS on June 10, 2015, 08:27:52 pm
Thanks
Wasn't sure if it would measure true rms same as the regular i200