EEVblog Electronics Community Forum

Electronics => Beginners => Topic started by: rbola35618 on December 26, 2014, 07:10:05 pm

Title: Tutorial Video, Forward Converter Part 1,2,3,4,5
Post by: rbola35618 on December 26, 2014, 07:10:05 pm
Here is a tutorial on how to analyze a two switch forward converter and how to simulate it using SPICE.

Video1:  Analysis of a Buck converter.
https://www.youtube.com/watch?v=GDE8j7g6s0U&list=PLQJi4gXVTqszH8wNRu5VjsrkTfO4bUTAV (https://www.youtube.com/watch?v=GDE8j7g6s0U&list=PLQJi4gXVTqszH8wNRu5VjsrkTfO4bUTAV)


Video2: Analysis of a forward converter.
https://www.youtube.com/watch?v=AddrmsLcqZQ&list=PLQJi4gXVTqszH8wNRu5VjsrkTfO4bUTAV&index=2 (https://www.youtube.com/watch?v=AddrmsLcqZQ&list=PLQJi4gXVTqszH8wNRu5VjsrkTfO4bUTAV&index=2)





Video 3 Analysis and simulation of the output inductor for forward converter.
https://www.youtube.com/watch?v=mGu2ccUpnIM&list=PLQJi4gXVTqszH8wNRu5VjsrkTfO4bUTAV&index=1 (https://www.youtube.com/watch?v=mGu2ccUpnIM&list=PLQJi4gXVTqszH8wNRu5VjsrkTfO4bUTAV&index=1)

Video 4 Forward Converter: An analysis of how the capacitor's ESR effects the ripple voltage.
https://www.youtube.com/watch?v=22rzr9j1D1Q&feature=youtu.be (https://www.youtube.com/watch?v=22rzr9j1D1Q&feature=youtu.be)

Will be adding more videos as time permit.

Questions or comments can be sent to rbola35618@aol.com

Robert

Title: Re: Tutorial Video, Forward Converter Part 1,2,3
Post by: planet12 on December 26, 2014, 10:57:02 pm
subscribers = subscribers + 1

Thanks Robert - just watched some of your flyback videos and quite enjoyed them too.
Title: Re: Tutorial Video, Forward Converter Part 1,2,3,4
Post by: rbola35618 on December 30, 2014, 12:26:29 am
Video 4 Forward Converter: An analysis of how the capacitor's ESR effects the ripple voltage.
https://www.youtube.com/watch?v=22rzr9j1D1Q&feature=youtu.be (https://www.youtube.com/watch?v=22rzr9j1D1Q&feature=youtu.be)
Title: Re: Tutorial Video, Forward Converter Part 1,2,3,4,5
Post by: rbola35618 on January 01, 2015, 02:49:11 am




 

In this tutorial, I show how to damp the output filter so that you don't get ringing when powering up the supply. I also show the effects of operating in Discontinuous Current Mode (DCM) and show how the supply will peak detect when in DCM. In peak detecting, the output voltage of the supply will ramp up and possibly damage any sensitive loads that the supply may be connected?

Forward Converter Part 5
https://www.youtube.com/watch?v=5qbUhcM4AUI&list=UURlTD_jqFY2MaPjWQnXTx4Q (https://www.youtube.com/watch?v=5qbUhcM4AUI&list=UURlTD_jqFY2MaPjWQnXTx4Q)
 ยท