Electronics > Beginners
Unleaded high temp solder in HORRIBLE
<< < (3/3)
Brumby:
The closer to the joint you can get the temperature sensor, the less the problem.  It can never be eliminated unless the sensor is actually on the joint.


--- Quote from: IanMacdonald on April 24, 2018, 06:52:21 am ---... with the element and sensor built into the actual tip reduce this problem ...

--- End quote ---

The problem will be reduced - it will not be eliminated.
Navigation
Message Index
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod