Electronics > Beginners
USB-C connector
(1/2) > >>
Jane:
If I plug in USB-C charger into USB-C connector, on which  pins I can   measure  the voltage coming from the charger?
 ( there are so many pins on USB-C connector    )
Deepak:
USB-C is symmetrical, and you want the GND and VBUS terminals.

timgiles:
VBUS and ground
Richard Crowley:
Remember that USB-C power is NOT static like older, more primitive power schemes.  There are at least three different voltage and current states that are negotiated between the power source and the load. And there is also provision for "proprietary" power modes. So if you simply measure the static voltage, that is only the "default" voltage/current.

Ref: https://en.wikipedia.org/wiki/USB-C#USB_Power_Delivery_Specification
vignesh_shan:
If i connect the device which requires around 3A current in the USB 3.0 PC. Does all the USB (Type A connector female)3.0 PC provide 3A current? 
Also pls let me know the link for device hardware configuration to getting 3.0A current in the Type C connector.
Navigation
Message Index
Next page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod