Author Topic: Use Fluke probes on Brymen multimeter  (Read 1694 times)

0 Members and 1 Guest are viewing this topic.

Offline jancelot

  • Regular Contributor
  • *
  • Posts: 133
Use Fluke probes on Brymen multimeter
« on: June 07, 2015, 07:11:30 pm »
Hi, wondering if can buy the Fluke TL175 probes or other variant and use them in the Brymen BM869s or the BM257s. Any ideas?
 

Offline GreyWoolfe

  • Super Contributor
  • ***
  • Posts: 3207
  • Country: us
  • NW0LF
Re: Use Fluke probes on Brymen multimeter
« Reply #1 on: June 07, 2015, 07:16:12 pm »
I don't see why that would be a problem, I use Brymen leads on my Fluke 27FM.
That which doesn't kill you still requires a co-pay.
 

Offline jancelot

  • Regular Contributor
  • *
  • Posts: 133
Re: Use Fluke probes on Brymen multimeter
« Reply #2 on: June 07, 2015, 07:28:03 pm »
Thanks, good to know
 

Offline cs.dk

  • Supporter
  • ****
  • Posts: 607
  • Country: dk
Re: Use Fluke probes on Brymen multimeter
« Reply #3 on: June 07, 2015, 08:37:46 pm »
I use Fluke probes on my BM869 and BM257 (No S-version though), no worries. They are standard 4 mm shrouded banana plugs, so every "standard" probe will fit.
 


Offline nanofrog

  • Super Contributor
  • ***
  • Posts: 5448
  • Country: us
Re: Use Fluke probes on Brymen multimeter
« Reply #5 on: June 09, 2015, 06:26:00 am »
you want these instead trust me:)

http://www.probemaster.com/index.php?cPath=2
+1 for Probemaster.  :-+

FWIW, the sets offer better value than Fluke/Pomona IME, and it's usually cheaper to buy direct.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf