Author Topic: using solder paste out of a tub  (Read 7483 times)

0 Members and 1 Guest are viewing this topic.

Offline macboy

  • Super Contributor
  • ***
  • Posts: 2007
  • Country: ca
Re: using solder paste out of a tub
« Reply #25 on: April 11, 2014, 03:53:17 pm »
got some flux from the radiator building shop at work and mixed it in.
:scared:
You must use electrical soldering flux. The stuff used for pipes is often acid based and is far too corrosive for electrical work.
 

Offline Simon

  • Global Moderator
  • *****
  • Posts: 14447
  • Country: gb
  • Did that just blow up? No? might work after all !!
    • Simon's Electronics
Re: using solder paste out of a tub
« Reply #26 on: April 11, 2014, 03:54:45 pm »
oh, I thought flux was acid full stop
 

Offline Kjelt

  • Super Contributor
  • ***
  • Posts: 5779
  • Country: nl
Re: using solder paste out of a tub
« Reply #27 on: April 11, 2014, 05:37:43 pm »
You gotta be kiddin, i would think it was an april fools joke   :palm:
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf