Electronics > Beginners

Voltage divider question, what R to use

<< < (4/4)

iMo:
Try with 100nF ceramic (when not operating in high vibrations environment). With 3 samples per second you may go with higher capacitance at the input.

lpaseen:
Tried with 100nF (=0.1uF) and also 10uF, not much of a difference.

Navigation

[0] Message Index

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod