Author Topic: Want to make an "oscilloscope basics" video, suggestions  (Read 759 times)

0 Members and 1 Guest are viewing this topic.

Offline taydinTopic starter

  • Frequent Contributor
  • **
  • Posts: 520
  • Country: tr
Want to make an "oscilloscope basics" video, suggestions
« on: May 14, 2019, 11:14:07 am »
I want to make a Turkish "oscilloscope basics" video for electronics beginners, to be published on YT and linked in my own forum. and trying to decide if a CRO would be better for this or a DSO.

The advantage of a CRO is that, pretty much all CRO's out there have nearly the same user interface. If you have used one CRO, you will be able to fully use another brand/model CRO within 10 minutes. But the disadvantage is that, when somebody watches the video and decides to buy an oscilloscope, he/she will probably buy a new DSO. So this kinda reduces the usefulness of the video.

The advantage of a DSO is that, first of all, I have one available right now :) But the disadvantage is that all DSO's have a different user interface. The screen looks different, the menus are different. And in terms of capabilities and features, DSO's from different vendors and models are VERY DIFFERENT. Also the DSO that I'm using is not something that a beginner would be buying. So how useful would it be to make a video with this DSO?

I'm leaning towards making the video with my DSO, but only sticking to features and capabilities that are videly available and that are fundamentel to a scope's operation. But I'm willing to hear any suggestions you guys have about this.
« Last Edit: May 14, 2019, 11:18:50 am by taydin »
Real programmers use machine code!

My hobby projects http://mekatronik.org/forum
 

Online rstofer

  • Super Contributor
  • ***
  • Posts: 9963
  • Country: us
Re: Want to make an "oscilloscope basics" video, suggestions
« Reply #1 on: May 14, 2019, 01:48:15 pm »
I would think the fundamental operations on DSOs would be very similar:  time/div, volts/div, trigger type and level, positioning, single shot and, to a lesser extent, measurements.  The fancy stuff like FFT and decoding will probably be vendor specific but, still, why not demonstrate them with the advice to read the manual?

There is a lengthy oscilloscope training video link at the top of this forum.  You may get some ideas.  I haven't watched it but w2aew produces some great videos.
 

Offline bitseeker

  • Super Contributor
  • ***
  • Posts: 9057
  • Country: us
  • Lots of engineer-tweakable parts inside!
Re: Want to make an "oscilloscope basics" video, suggestions
« Reply #2 on: May 14, 2019, 05:39:30 pm »
I'd recommend doing the video using a DSO. Although there are some front panel layout differences between different brands and models of DSO, the same is true of CRO.

If you want to do one with a CRO, it could be a follow up to the DSO, but not a replacement.
TEA is the way. | TEA Time channel
 

Offline pwlps

  • Frequent Contributor
  • **
  • Posts: 372
  • Country: fr
Re: Want to make an "oscilloscope basics" video, suggestions
« Reply #3 on: May 15, 2019, 11:56:42 am »
One thing you cannot show with a CRO is to analyse the signal before the trigger. I remember when first DSOs appeared in our lab we were fascinated by their ability to break causality rules imposed on CRO  :)
 

Offline taydinTopic starter

  • Frequent Contributor
  • **
  • Posts: 520
  • Country: tr
Re: Want to make an "oscilloscope basics" video, suggestions
« Reply #4 on: May 15, 2019, 12:03:53 pm »
Thanks for the responses guys. I will use my existing scope and only stick to features that are more or less common to all DSO's.
Real programmers use machine code!

My hobby projects http://mekatronik.org/forum
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf