Electronics > Beginners
What is this conector type?
(1/1)
001:
Hi

I`m gonna buy LCD with ribbon wire


What type connector on PCB I need?
mariush:
Flat flex connectors ... figure out number of traces and pitch (spacing between the wires) and thickness of ribbon cable : https://www.digikey.com/products/en/connectors-interconnects/ffc-fpc-flat-flexible-connectors/399

The displays don't have the same ribbon cable... the datasheet would normally say or you can determine from drawings. 
ledtester:
Have a look at:

https://www.aliexpress.com/item/32982483720.html

and:

https://www.aliexpress.com/item/32858205410.html

Make sure you get the right pitch.
Ysjoelfir:
How about looking into the datasheet for the Display you intend to buy? Most probably they tell you exactly which mating connector should be used.
Navigation
Message Index
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod