EEVblog Electronics Community Forum
EEVblog => EEVblog Specific => Topic started by: StillTrying on October 13, 2019, 05:22:31 pm
-
Only on this thread. :-//
https://www.eevblog.com/forum/testgear/siglent-sds1204x-e-released-for-domestic-markets-in-china/1475/ (https://www.eevblog.com/forum/testgear/siglent-sds1204x-e-released-for-domestic-markets-in-china/1475/)
-
What's the 1475 at the end of the url? Works fine without it.
-
What's the 1475 at the end of the url? Works fine without it.
It's the bit that opens it at the last, most recent page = 60. Other pages, are OK.
Page 59 https://www.eevblog.com/forum/testgear/siglent-sds1204x-e-released-for-domestic-markets-in-china/1450/ (https://www.eevblog.com/forum/testgear/siglent-sds1204x-e-released-for-domestic-markets-in-china/1450/)
-
Right, of course. The last page doesn't work for me either. :-//
-
I keep getting a 502 Bad Gateway error when loading "Show unread posts since last visit". Sometimes the link works, most of the time it doesn't.
-
Yes, 502s as well now.
-
I'm not sure if I messed it up even more, but I was able to make a test comment in that thread. I thought I could delete it from my profile but apparently you need to do it from the thread itself. Which I can't access. :scared:
-
I'm not sure if I messed it up even more, but I was able to make a test comment in that thread. I thought I could delete it from my profile but apparently you need to do it from the thread itself.
If we all add posts there, eventually it'll get on to page 61. >:D
-
It's the bit that opens it at the last, most recent page = 60. Other pages, are OK.
Same here, page 59 no problem, page 60 causes the 504.
-
This has happened before, and if I remember well it has got something to do with a picture in one of the posts on that page. I will report a post from this thread so an admin can have a look, they fixed it in the past.
You can click the 'print' button to read the thread, this leaves out the pictures and loads all pages fine.
-
I am sorry but I am currently unable to look into the issue, I am overseas for a Wedding and connectivity where I am is patchy at best. I will try to get to this later today.
-
I am sorry but I am currently unable to look into the issue, I am overseas for a Wedding and connectivity where I am is patchy at best. I will try to get to this later today.
Unless someone wants to correct me, it seems like everything is working fine at the moment - at least on my end. I haven't gotten any errors in the last hour or so.
-
I am sorry but I am currently unable to look into the issue, I am overseas for a Wedding and connectivity where I am is patchy at best. I will try to get to this later today.
Thanks gnif, all posts on P60 prior to post #1500 on P61 are giving the issue.
This has happened before, and if I remember well it has got something to do with a picture in one of the posts on that page.
Yep I crashed a thread for the SDS5054X uploading a corrupt file, gawd knows how I did it but gnif fixed it. :phew: