Author Topic: changing the rigol DS1052E to DS1102E using USB , the dummy guide  (Read 1078514 times)

0 Members and 1 Guest are viewing this topic.

Offline szafranski

  • Contributor
  • Posts: 10
  • Country: pl
Re: changing the rigol DS1052E to DS1102E using USB , the dummy guide
« Reply #1825 on: July 20, 2020, 04:52:37 pm »
EDIT: Ok, so I will write my story with an update. I bought some scope with very old FW like 00.01 or sth. I firstly update it to the newest 04.02.01 - from the Rigol site:

https://www.rigolna.com/firmware/

No problem.

Next I did everything what is written on this site:

http://www.g4ztd.info/rigol-ds1052e-oscilloscope-hack/

using this site/program as an hex editor:

https://hexed.it/

and program named "hashcalc" as an checksum generator/checker.

Everything works just fine now :)

thanks for previous posts. It gave me some confidence.

 

Offline leet

  • Newbie
  • Posts: 4
  • Country: ug
Re: changing the rigol DS1052E to DS1102E using USB , the dummy guide
« Reply #1826 on: July 27, 2020, 03:51:57 pm »
Good day! Bought Rigol DS1052E with software 00.04.02 SP1, but HW is not wiev. Can I flash DS1052E to DS1102E with Unlock? Thanks for any help!
 

Offline szafranski

  • Contributor
  • Posts: 10
  • Country: pl
Re: changing the rigol DS1052E to DS1102E using USB , the dummy guide
« Reply #1827 on: July 27, 2020, 04:00:49 pm »
I basically did just that :) help needed?
 

Offline leet

  • Newbie
  • Posts: 4
  • Country: ug
Re: changing the rigol DS1052E to DS1102E using USB , the dummy guide
« Reply #1828 on: July 27, 2020, 05:51:56 pm »
I basically did just that :) help needed?
Yes! I need help
 

Offline szafranski

  • Contributor
  • Posts: 10
  • Country: pl
Re: changing the rigol DS1052E to DS1102E using USB , the dummy guide
« Reply #1829 on: July 27, 2020, 06:03:02 pm »
So if you have some questions that answered maybe beneficial for others - write here on the forum. If you have some other questions and you rather want to talk more like a "chat" you can hit me PM or e-mail.
« Last Edit: July 27, 2020, 06:27:54 pm by szafranski »
 

Offline leet

  • Newbie
  • Posts: 4
  • Country: ug
Re: changing the rigol DS1052E to DS1102E using USB , the dummy guide
« Reply #1830 on: July 27, 2020, 06:29:10 pm »
So if you have some questions that answered maybe beneficial for other - write here on the forum. If you have some other questions and you rather want to talk more like a "chat" you can hit me PM or e-mail.
Can you help! In my 00019690 is it 10 89 e5 01 00 a8 61 08 08 05 10 09 60 89 e6 7d. And Where write a serial number! Thanks
 

Offline szafranski

  • Contributor
  • Posts: 10
  • Country: pl
Re: changing the rigol DS1052E to DS1102E using USB , the dummy guide
« Reply #1831 on: July 27, 2020, 06:32:31 pm »
Your serial number is irrelevant. Just do it according to those instructions:
 
http://www.g4ztd.info/rigol-ds1052e-oscilloscope-hack/

You just have to change 1 value in one line in a file and than copy it on a thumb drive and connect to the oscilosope. I can even send U that file if you don't want to mess with ot.
« Last Edit: July 27, 2020, 06:34:30 pm by szafranski »
 
The following users thanked this post: leet

Offline szafranski

  • Contributor
  • Posts: 10
  • Country: pl
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf