Author Topic: changing the rigol DS1052E to DS1102E using USB , the dummy guide  (Read 1302344 times)

0 Members and 3 Guests are viewing this topic.

Offline psyko_chewbacca

  • Newbie
  • Posts: 1
  • Country: ca
Re: changing the rigol DS1052E to DS1102E using USB , the dummy guide
« Reply #1725 on: October 02, 2015, 03:42:17 am »
Hi straycat,

Could I please have the latest version of the firmware for my DS1000E scope.

It's already hacked as a DS1152E and is currently on firmware 4.01 (HW version 58).
Here's my email:
psyko_chewbacca@hotmail.com

Thanks!
 

Offline essence25

  • Newbie
  • Posts: 4
  • Country: us
Re: changing the rigol DS1052E to DS1102E using USB , the dummy guide
« Reply #1726 on: October 02, 2015, 07:52:48 am »
I would also like the new firmware please.
Thank you! 1052E 00.03.01
 

Offline techkarlsson

  • Newbie
  • Posts: 2
  • Country: se
Re: changing the rigol DS1052E to DS1102E using USB , the dummy guide
« Reply #1727 on: October 07, 2015, 05:02:36 pm »
Hi,

First of all, a big thanks to everyone involved in developing this "mod". Highly appreciated!

I have a DS1052E and just want to clarify that this one a moddable. I've not made any upgrade/update of it since purchase.

Code: [Select]
Model:         DS1052E
Serial:        DS1ET16XXXXXXX
Software_      00.04.01.00.02
               DSP: 00.01
               FPGA: 03.07
               HardV: 58

FFT, USB, P/F and RS232 installed

Will I be able to mod it i.a.w the dummy guide?
 

Offline raspi

  • Newbie
  • Posts: 1
  • Country: de
Re: changing the rigol DS1052E to DS1102E using USB , the dummy guide
« Reply #1728 on: October 08, 2015, 05:11:01 pm »
please send me the mod too

thank you :D

dennis.fukas@googlemail.com
 

Offline techkarlsson

  • Newbie
  • Posts: 2
  • Country: se
Re: changing the rigol DS1052E to DS1102E using USB , the dummy guide
« Reply #1729 on: October 09, 2015, 08:57:34 pm »
Went back some pages and downloaded SW to a stick. After upgrade I've got 2ns timebase.
Superb. Well done guys  :-+
 

Offline vlbk

  • Newbie
  • Posts: 1
  • Country: lv
Re: changing the rigol DS1052E to DS1102E using USB , the dummy guide
« Reply #1730 on: October 16, 2015, 01:56:04 pm »
Hi! A'm have DS1052E with firmware version 00.04.01 SP7.
Can you sent me a new version of the hacked firmware?

My e-mail: vlbk@inbox.lv

More thanks and best regards
Vladimir
 

Offline ValGlu

  • Newbie
  • Posts: 3
Re: changing the rigol DS1052E to DS1102E using USB , the dummy guide
« Reply #1731 on: October 16, 2015, 05:39:14 pm »
Hello, straycat.
Can you sent me the ORIGINAL version of the new firmware (00.04.02)?
Many thanks!
My e-mail: valg@ukr.net
 

Offline lektronick

  • Newbie
  • Posts: 5
 

Offline straycat

  • Regular Contributor
  • *
  • Posts: 93
Re: changing the rigol DS1052E to DS1102E using USB , the dummy guide
« Reply #1733 on: October 18, 2015, 12:44:23 pm »
hI GUYS, .Thank you guys for your messages, the one,s that have asked about the new firmware 00.04.02.01.00 can it be updated to 100mhz, the answer is yes already done..
 

Offline freimann

  • Newbie
  • Posts: 1
  • Country: cz
Re: changing the rigol DS1052E to DS1102E using USB , the dummy guide
« Reply #1734 on: October 19, 2015, 04:17:38 pm »
Hi Straycat,

would you please send me the new firmware ...

Thank you - peter@freimann.cz - DS1052E @ 02.06
 

Offline ceaushu

  • Newbie
  • Posts: 1
  • Country: at
Re: changing the rigol DS1052E to DS1102E using USB , the dummy guide
« Reply #1735 on: October 21, 2015, 08:35:23 pm »
Hi Straycat, could you please send me the file for DS 1052E  (current version 00.04.02.01.00), modified for 100 MHz ?
Thank you!

The e-mail address is ceaushu@yahoo.com
 

Offline w33m4n_

  • Newbie
  • Posts: 5
  • Country: de
Re: changing the rigol DS1052E to DS1102E using USB , the dummy guide
« Reply #1736 on: October 21, 2015, 09:18:04 pm »
Hi everybody,
i have got my new ds1052e
the firmeware is 00.04.02.01.00 HW=58
i want to modify it to do the 100mhz. but i dont understand the guide.
can somebody tell me how it works with my firmware version?

thanks
« Last Edit: October 22, 2015, 09:37:36 pm by w33m4n_ »
 

Offline straycat

  • Regular Contributor
  • *
  • Posts: 93
Re: changing the rigol DS1052E to DS1102E using USB , the dummy guide
« Reply #1737 on: October 22, 2015, 12:35:30 pm »
Hi w33m4n. have emailed you the new update. To install it, put the file on a usb stick, plug it in your scope, it should say new or same update found"do you want to install" just install it, re-start your scope and your done. Hope this helps. :-+
 

Offline straycat

  • Regular Contributor
  • *
  • Posts: 93
Re: changing the rigol DS1052E to DS1102E using USB , the dummy guide
« Reply #1738 on: October 22, 2015, 12:44:36 pm »
Hi,

First of all, a big thanks to everyone involved in developing this "mod". Highly appreciated!

I have a DS1052E and just want to clarify that this one a moddable. I've not made any upgrade/update of it since purchase.

Code: [Select]
Model:         DS1052E
Serial:        DS1ET16XXXXXXX
Software_      00.04.01.00.02
               DSP: 00.01
               FPGA: 03.07
               HardV: 58

FFT, USB, P/F and RS232 installed

Will I be able to mod it i.a.w the dummy guide?

STRAYCAT.
Doing the update the old way i would say no on that,although i have done many without any issues,. The problem you will have is that the firmware you have installed you cant downgrade unless you know what your doing i.e modding the firmware. My advice is to just update it with the new firmware on a usb.. Hope this helps.
 

Offline Input220v

  • Newbie
  • Posts: 2
  • Country: lv
Re: changing the rigol DS1052E to DS1102E using USB , the dummy guide
« Reply #1739 on: October 22, 2015, 03:33:09 pm »
Hi StrayCat,
What do you think about this version?
DS1052E
Serial No. DS1ET xxxxxxxx
Software Version 00.04.01.07.00
HardVersion = 58
I can send dump flash s29gl064 and  24lc04 eeprom
maybe you have solution to downgrade the firmware to get 100MHz
« Last Edit: October 22, 2015, 03:51:40 pm by Input220v »
 

Offline ValGlu

  • Newbie
  • Posts: 3
Re: changing the rigol DS1052E to DS1102E using USB , the dummy guide
« Reply #1740 on: October 24, 2015, 10:05:49 am »
Hello, lektronick.
Thanks for the link.
 

Offline straycat

  • Regular Contributor
  • *
  • Posts: 93
Re: changing the rigol DS1052E to DS1102E using USB , the dummy guide
« Reply #1741 on: October 24, 2015, 04:22:31 pm »
Just would like to say,glad all you guys who have emailed me are happy with the modded 00.04.02.01.00 update, Glad i could help. :-+
« Last Edit: October 24, 2015, 04:25:13 pm by straycat »
 

Offline fauweh

  • Newbie
  • Posts: 1
  • Country: de
Re: changing the rigol DS1052E to DS1102E using USB , the dummy guide
« Reply #1742 on: October 26, 2015, 09:51:53 pm »
Hi Straycat,
could you please send me the modded firmware for 100 MHz?
My Scope is a DS1052E @ original 00.04.02.01.00
Thank you in advance!
My mailadress: fau-weh@gmx.de
« Last Edit: October 26, 2015, 09:53:44 pm by fauweh »
 

Offline N7PXY

  • Newbie
  • Posts: 1
  • Country: us
Re: changing the rigol DS1052E to DS1102E using USB , the dummy guide
« Reply #1743 on: October 31, 2015, 07:09:30 pm »
straycat,
I would also like a copy of the software to modify a DS1052e from 50mhz to 100mhz.
Thanks,
PJ
hickspj467 (at) Comcast.net
 

Offline Borat

  • Newbie
  • Posts: 4
  • Country: gb
Re: changing the rigol DS1052E to DS1102E using USB , the dummy guide
« Reply #1744 on: November 02, 2015, 03:23:24 am »
I realise this is my first post so Hi guys and girls.

I wanted to know if this "hack" is still working ok? I was going to buy a DS1052E from rigol.co.uk but wanted to be sure this still works ok on the latest firmware. Last thing I want is for it to be patched in the latest version (04.01 I think).

If it is, could I get a copy of the modded firmware please?
 

Offline straycat

  • Regular Contributor
  • *
  • Posts: 93
Re: changing the rigol DS1052E to DS1102E using USB , the dummy guide
« Reply #1745 on: November 04, 2015, 04:55:06 pm »
Borat,.   Yes it can modded to 100mhz. Hope this helps. :-+
 

Offline Borat

  • Newbie
  • Posts: 4
  • Country: gb
Re: changing the rigol DS1052E to DS1102E using USB , the dummy guide
« Reply #1746 on: November 04, 2015, 05:22:57 pm »
Thanks for getting back straycat! Shifted my attention to the 2072A "thanks" to an eevblog youtube video - damn you eevblog! *shakes fist*
 

Offline shiftline

  • Contributor
  • Posts: 36
  • Country: ca
Re: changing the rigol DS1052E to DS1102E using USB , the dummy guide
« Reply #1747 on: November 13, 2015, 03:25:12 am »
Hey Guys, I'm about to order my first real o-scope (well i have a cheap USB one..)

I was looking at the Rigol DS1102Eg until i found this wonderful upgrade for the Rigol DS1052E.   Mind as well save $80 if the hardware is the same..Acording to the video it looks like I will have to downgrade the firmware to mod it.. I cant seem to find a link so like the previous post could someone please hook me up with a copy! 

Thanks guys! :D  I'm to get my new toy :)

 

Offline Arses

  • Newbie
  • Posts: 2
  • Country: ua
Re: changing the rigol DS1052E to DS1102E using USB , the dummy guide
« Reply #1748 on: November 13, 2015, 08:00:24 am »
Hi, all!
Please send me last firmware) email: sendbox0(at)ukr.net
THX ;D
 

Offline shiftline

  • Contributor
  • Posts: 36
  • Country: ca
Re: changing the rigol DS1052E to DS1102E using USB , the dummy guide
« Reply #1749 on: November 13, 2015, 03:19:21 pm »
me too please  sicon99 (at) hotmail (dotcom)
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf