Author Topic: EEVBlog #1143 - Eakins Microscope Barlow Lenses  (Read 2397 times)

0 Members and 1 Guest are viewing this topic.

Offline EEVblog

  • Administrator
  • *****
  • Posts: 29205
  • Country: au
    • EEVblog
EEVBlog #1143 - Eakins Microscope Barlow Lenses
« on: November 02, 2018, 09:26:51 am »
Check out the amazing increased working distance on the Eakins microscope using a barlow lens to get a larger working area.

Bundle: http://s.click.aliexpress.com/e/b7ycSav2
Microscope: http://s.click.aliexpress.com/e/eN3Ec5a
Stand: http://s.click.aliexpress.com/e/bHSXalzm
C Mount Lens Adapters: http://s.click.aliexpress.com/e/cMimkzYc
Barlow Lenses: http://s.click.aliexpress.com/e/bmS9nWbe

 
The following users thanked this post: SeanB

Online Brumby

  • Supporter
  • ****
  • Posts: 9055
  • Country: au
Re: EEVBlog #1143 - Eakins Microscope Barlow Lenses
« Reply #1 on: November 02, 2018, 01:20:26 pm »
Aside from that erroneous focus hunting, you now have my attention!

For the cost, the image quality, working distance and auto focus capabilities have put this unit at the top of my list.  The limited field of view is a little bit of a concern, but for the most part I don't see it as a big factor in my decision (although I do realise that there will probably be a couple of times when I will grizzle about it).

Do let us know about any progress you have with regards to the capture problem.  Understanding this is perhaps the single most concerning issue for me.  I would hate to get the unit only to find I couldn't integrate it with other equipment and workflows.
 

Offline BravoV

  • Super Contributor
  • ***
  • Posts: 5872
  • Country: 00
Re: EEVBlog #1143 - Eakins Microscope Barlow Lenses
« Reply #2 on: November 02, 2018, 01:34:41 pm »
Damn you Dave, now its in my shopping list.  :palm:

Offline smbaker

  • Regular Contributor
  • *
  • Posts: 160
  • Country: us
    • Scott's Electronics & Sandrail & Old BBS Game Blog
Re: EEVBlog #1143 - Eakins Microscope Barlow Lenses
« Reply #3 on: November 02, 2018, 01:34:51 pm »
I purchased the 0.35X barlow with mine. The working distance is truly huge, more than I need, and seemed to cause some focusing issues. I'm thinking an 0.5X barlow might have been sufficient. I'm excited to watch Dave's video, hopefully he tried both the 0.35X and the 0.5X.
 

Offline cdev

  • Super Contributor
  • ***
  • Posts: 5082
  • Country: 00
Re: EEVBlog #1143 - Eakins Microscope Barlow Lenses
« Reply #4 on: November 02, 2018, 02:01:31 pm »
Really good DOF
"What the large print giveth, the small print taketh away."
 

Online Brumby

  • Supporter
  • ****
  • Posts: 9055
  • Country: au
Re: EEVBlog #1143 - Eakins Microscope Barlow Lenses
« Reply #5 on: November 02, 2018, 06:25:28 pm »
I purchased the 0.35X barlow with mine. The working distance is truly huge, more than I need, and seemed to cause some focusing issues. I'm thinking an 0.5X barlow might have been sufficient. I'm excited to watch Dave's video, hopefully he tried both the 0.35X and the 0.5X.

Dave - can you comment on this, please?
 

Offline johnlsenchak

  • Frequent Contributor
  • **
  • Posts: 252
  • Country: us
  • js@antihotmail.com
    • paypal.me/johnsenchak
Re: EEVBlog #1143 - Eakins Microscope Barlow Lenses
« Reply #6 on: November 02, 2018, 10:35:08 pm »


I  didn't   find this video ,  very interesting  ;)
John Senchak "Daytona  Beach  Florida "
 jls (at)  antihotmail.com   http://www.antihotmail.com
https://www.facebook.com/john.senchak.1
 

Offline German_EE

  • Super Contributor
  • ***
  • Posts: 2197
  • Country: de
Re: EEVBlog #1143 - Eakins Microscope Barlow Lenses
« Reply #7 on: November 03, 2018, 05:24:23 am »
That's OK, maybe your eyesight is good enough to solder 0201 parts without magnification. The rest of us need kit like this and we're grateful that Dave gas found a microscope system that is so cheap.
Should you find yourself in a chronically leaking boat, energy devoted to changing vessels is likely to be more productive than energy devoted to patching leaks.

Warren Buffett
 
The following users thanked this post: SeanB

Offline dav888

  • Contributor
  • Posts: 7
  • Country: se
  • hw engineer in the synth biz
Re: EEVBlog #1143 - Eakins Microscope Barlow Lenses
« Reply #8 on: December 03, 2018, 01:26:21 am »
Anyone knows if it's possible to run these cameras standalone?
Capturing to SD-card (without the need for a computer)!?
 

Offline rrinker

  • Super Contributor
  • ***
  • Posts: 1854
  • Country: us
Re: EEVBlog #1143 - Eakins Microscope Barlow Lenses
« Reply #9 on: December 04, 2018, 03:18:57 am »
That's OK, maybe your eyesight is good enough to solder 0201 parts without magnification. The rest of us need kit like this and we're grateful that Dave gas found a microscope system that is so cheap.

 I think even WITH this microscope I'd have problems seeing 0201. However, this may make it possible for me to work with the larger sizes. I already need a magnifier to work with through hole. I definitely have one of these on my future purchase list - it will also come in handy for my other hobby.

 

Offline tchicago

  • Contributor
  • Posts: 46
  • Country: us
Re: EEVBlog #1143 - Eakins Microscope Barlow Lenses
« Reply #10 on: December 04, 2018, 07:53:12 am »
got my 0.5 lense, which gives a lot of room.

I think I noticed that the magnification factor gets larger with the lense, which probably makes sense from the optical geometry standpoint.

Regarding the autofocus - I disabled it on Eakins the first 15 minutes after playing with it, even without the Barlow lense. It kept focusing on the wrong things, so I switched to manual focus using those large black knobs.

One interesting thing I noticed is that this scope does not help much in reading the laser-etched chip markings. I think it is a combination of the is too much light reflected off the black surface of the chip, which becomes a bit glossy at this magnification. And another issue is that the etched area does not diffuse much light when looked at 90 angle.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf